OzVMX Forum

Clubroom => Tech Talk => Topic started by: micko on July 14, 2014, 11:01:18 pm

Title: RM370 kickstart shaft
Post by: micko on July 14, 2014, 11:01:18 pm

Does anyone know if a RM400C kickstart shaft is the same as a RM370.

Title: Re: RM370 kickstart shaft
Post by: pokey on July 14, 2014, 11:27:50 pm

My software says

26211-41201   SHAFT,KICK STARTER   
370A
370B


26211-41210   SHAFT,KICK STARTER   
RM400C

Title: Re: RM370 kickstart shaft
Post by: micko on July 14, 2014, 11:34:43 pm

Yes part numbers are different but I'm thinking it's just the spline difference (fine to coarse) seals the same diameter etc. Thanks

Title: Re: RM370 kickstart shaft
Post by: William Doe on July 15, 2014, 04:11:12 am

Early 370As had the smaller spline shaft

Title: Re: RM370 kickstart shaft
Post by: rocketfrog on July 15, 2014, 11:09:34 am

Micko, check this bulletin out for more info on the kicker shaft interchangeability

http://www.ozebook.com/compendium/techbuls/SerBulletin%20RM%2027-35.pdf

Title: Re: RM370 kickstart shaft
Post by: micko on July 16, 2014, 12:02:22 am

That's for all the info, much appreciated.