OzVMX Forum

Clubroom => Tech Talk => Topic started by: k2000x on July 07, 2014, 03:51:39 pm

Title: 1972 cz250 ignition
Post by: k2000x on July 07, 2014, 03:51:39 pm

Who makes the cheapest cz 250 replacement ignition and were can I get it 980 motor yellow tanker

Title: Re: 1972 cz250 ignition
Post by: tony27 on July 07, 2014, 04:38:02 pm

Electrexworld does an ignition including the flywheel for 195gbp, planning on buying 1 later in the year
http://www.electrexworld.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww%2eelectrexworld%2eco%2euk%2f&WD=cz&PN=STK%2d950%2ehtml%23aSTK_2d950#aSTK_2d950

Powerdynamo does their own which look to be what the guys in Poland sell on ebay etc, cost is 310euro so quite a lot dearer. Personally I don't like the look of the magnets in the flywheel, they look to be stuck to the inside suface rather than sunken into it
http://www.powerdynamo.biz/eng/systems/7209/72095main.htm

Title: Re: 1972 cz250 ignition
Post by: Noel on July 07, 2014, 04:46:30 pm

Suzuki.
TS 185 ER

Title: Re: 1972 cz250 ignition
Post by: k2000x on July 07, 2014, 05:11:41 pm

done the er185 mod years ago worked ok but looking for something better

Title: Re: 1972 cz250 ignition
Post by: VMX60 on July 07, 2014, 06:06:47 pm

This UK unit a new one


http://www.westonuk.co.uk/westonuk2_073.htm


http://crhighperformance.com/?wpshop_product=cz-electronic-ignition-469-95   CR in the USA

http://www.vmxunlimited.com/categories/CZ/Electrical/

Title: Re: 1972 cz250 ignition
Post by: Moto on July 07, 2014, 07:00:41 pm

Cross the Electrex off your list,a friend bought one and it didn't work properly.After much heartache he got it tested and found it had a crazy advance curve which made the bike run poorly.No reply,no refund and no communication from the English supplier.An expensive paperweight.

Title: Re: 1972 cz250 ignition
Post by: tony27 on July 07, 2014, 07:29:40 pm

Quote from: Moto on July 07, 2014, 07:00:41 pm

Cross the Electrex off your list,a friend bought one and it didn't work properly.After much heartache he got it tested and found it had a crazy advance curve which made the bike run poorly.No reply,no refund and no communication from the English supplier.An expensive paperweight.

So that's HPI off the list as well, photos & part numbers are the same as electrexworld

Title: Re: 1972 cz250 ignition
Post by: Simo63 on July 07, 2014, 07:46:55 pm

I had a PVL fitted to my CZ250 and I still have one fitted to my CZ400.  Both have been great BUT you miss the flywheel weight.

Food for thought?

Title: Re: 1972 cz250 ignition
Post by: Lozza on July 07, 2014, 08:56:00 pm

Li-Po battery, programmable ignition pick up of any bike and any flywheel with a external lobe. About $400 less if you are inventive.