OzVMX Forum

Clubroom => General Discussion => Topic started by: albrid-3 on June 26, 2014, 07:09:17 pm

Title: pre 70,65,60 race meeting
Post by: albrid-3 on June 26, 2014, 07:09:17 pm
Who on here would support a pre 70, pre 65 club level meeting only, and would the riders that own these type of bikes outside of the forum would they support it too, if there was a one off meeting
ran here in victoria and the heaven club are also trying to get a similar meeting off the ground too.
Title: Re: pre 70,65,60 race meeting
Post by: Dono113 on June 26, 2014, 07:34:42 pm
The 69 TS would be up for it Dave ;D
Title: Re: pre 70,65,60 race meeting
Post by: supersenior 50 on June 26, 2014, 08:42:41 pm
There is an event similar to your suggestion, it's called the Australian Classic Championship. Put on a good meet and we'll come
Title: Re: pre 70,65,60 race meeting
Post by: Iain Cameron on June 26, 2014, 09:39:08 pm
At the right time of year you could get an overseas entry . ;D ;D ;D
Title: Re: pre 70,65,60 race meeting
Post by: albrid-3 on June 26, 2014, 09:51:05 pm
What I am thinking is, at club level, riders that own this era of machines are not using them, and pre 65 bikes your lucky to get 3 or none on the starting grid.  and if there was a none race meeting
held only for pre 70 era to 60`s if may tis them out for a day.
Title: Re: pre 70,65,60 race meeting
Post by: sleepy on June 27, 2014, 12:27:05 pm
I think it would be well supported but only if it was done outside of MA.
I have a Pre65 AJS Metisse that I have been restoring for a while and even if I ever finish it is unlikely to ever see the track at an MA meeting. Main issues, doesn't have folding footrests, no provisions for the ridiculous rear sprocket cover, no provision on mag for kill switch and other things that I haven't thought off.
So without butchering the bike it would never get through scrut so why would I even bother.
Title: Re: pre 70,65,60 race meeting
Post by: albrid-3 on June 27, 2014, 03:55:13 pm
I think it would be well supported but only if it was done outside of MA.
I have a Pre65 AJS Metisse that I have been restoring for a while and even if I ever finish it is unlikely to ever see the track at an MA meeting. Main issues, doesn't have folding footrests, no provisions for the ridiculous rear sprocket cover, no provision on mag for kill switch and other things that I haven't thought off.
So without butchering the bike it would never get through scrut so why would I even bother.

At club level ride days, thats ok.
Title: Re: pre 70,65,60 race meeting
Post by: Brian Watson on June 27, 2014, 05:44:14 pm
Sleepy, unless you are using the AJ for speedway..you don't need a kill switch.. so..one step closer to bring the old girl out..  ;D
Title: Re: pre 70,65,60 race meeting
Post by: albrid-3 on June 27, 2014, 06:47:23 pm
I would like to see and be in the same paddock with just pre 70 bikes, pre 65 bikes only.
Title: Re: pre 70,65,60 race meeting
Post by: sleepy on June 27, 2014, 09:16:47 pm
Sleepy, unless you are using the AJ for speedway..you don't need a kill switch.. so..one step closer to bring the old girl out..  ;D

Not for speedway use. You must have a different rule book to me. The one I have (2013) still has all disiplines having kill switches but speedway has to have a lanyard kill. MX will probably be next with the lanyard after the legends at MA decided that trials bikes were so dangerous they needed the lanyards.