OzVMX Forum
Marque Remarks => KTM => Topic started by: Oldmxnut on June 27, 2008, 09:11:36 am
-
Gents, since i missed out going to big show down south, and i have a couple of projects, anyone interested in the following to swap, buy or sell etc.
I have:
* 400cc /78 year mod engine/ exc cond.
* Piggyback Ohlins reach shocks / exc cond.
* 38mm forks / tripple clamp -
* 40mm Marzocchi forks / tripple clamps - came off a 250cc MX / 82 mod
* S&W rear shocks (not that flash condition good for parts)
* GS 300 / 85(?) mod bike complete, less some bits / unrestored.
Looking for:
74 mx project: Any section or complete exhaust for 74 / 250cc
76 gs project: 250 cc engine, or at least bottom cases. [my engine bottom end was wasted away, have looked at weld build up, but very expensive exercise]
Handle bars for a 74
Cheers Ash (oldmxnut)
-
how much for the engine and the 300 gs
[email protected]
-
Hi Ash, might be able to help with `74 handlebars and exhaust.
What lenght/ model are the Ohlins shocks?
-
Ash,
I might be able to use the 38mm forks. Do you know what they came off, a brand and a price please.
All the best
Pete
[email protected]
-
If Paul hasn't taken it already I'm interested in the 400 engine
[email protected]
-
ive had no reply so im not sure wtf going on
-
Checked out a potential resto/racer today in a 76 KTM MC5 400, motor pieces are pretty sad looking so the 400 engine you are offering Oldmxnut could be the deciding factor on wether to proceed.
The email address I previously posted is actually incorrect, could you please ph me on 0419270390.
-
Apologies Gents for not replying earlier. I had got busy after the original post and forgotten about it. Please look for individaul replys to requests.
Also the 38mm forks and triple clamps are from a Pursang MK9 250 or 370cc and/or a Frontera MK10 250 or 370 cc.. So I am told by the Bultaco Parts guys in Victoria. Good nick $200 for the lot if anyone interested.
76 / 400cc Engine is very good condition. Very clean inside. Surface restoration would make it come up nice. $600 if anyone interested
Need someone to identify the GS bike. SN is KTM 8709*52546 Also a compliance place with some numbers and 400GS stamped on it. So prob a 400 GS??
Regards Ash.
-
ash how much for the ohlins shocks
and what length are they ;D
thanks rusty ;D