OzVMX Forum

Marketplace => Wanted => Topic started by: Iain Cameron on May 11, 2014, 04:17:42 pm

Title: Wanted 1974 YZb side covers
Post by: Iain Cameron on May 11, 2014, 04:17:42 pm

Hi gents Im after some sidecovers for a 1974 YZb or a contact who makes them . I was going to contact "prixhistoric " but they seem to have gone belly up . Iain

Title: Re: Wanted 1974 YZb side covers
Post by: Rossvickicampbell on May 11, 2014, 06:35:49 pm

Mr Iain

http://classic-motorcycle-fiberglass.com/gallery/bodywork/Yamaha_YZ360B_Sidecovers.htm

shame to hear about Prixhistoric - the last set I got was good.

Match Mick also does them but his are VERY thick and heavy - good quality though!

cheers

Title: Re: Wanted 1974 YZb side covers
Post by: Iain Cameron on May 11, 2014, 06:41:45 pm

Thanks Ross

Title: Re: Wanted 1974 YZb side covers
Post by: farmpro on May 17, 2014, 07:31:12 am

Hey Ian !!!

I think I have a set if you can't find any.Let me know.
Need anything else ???

Bill Davis     Texas Vintage Racing Club.

Title: Re: Wanted 1974 YZb side covers
Post by: Iain Cameron on May 17, 2014, 09:59:48 am

Yes Bill . A Head if you have one even if its got some damage , I will say yes to the sidecovers as well Bill . thanks Iain

Title: Re: Wanted 1974 YZb side covers
Post by: Rossvickicampbell on May 17, 2014, 12:07:21 pm

Iain - I have some spare ones - second hand, fibreglass if you are desperate?

Title: Re: Wanted 1974 YZb side covers
Post by: Iain Cameron on May 18, 2014, 09:18:18 pm

Not desperate but how much would you like for them Ross .

Title: Re: Wanted 1974 YZb side covers
Post by: farmpro on May 19, 2014, 01:03:54 pm

Ian !!!

Do you need a 250 or 360 head ??? I'll see what I have. I know I have a good set of side covers.

Title: Re: Wanted 1974 YZb side covers
Post by: Iain Cameron on May 19, 2014, 06:02:13 pm

A 250 head thanks bill and the side covers if your not going to use them as I don't want to take Ross 's spare set and leave him short . Iain

Title: Re: Wanted 1974 YZb side covers
Post by: farmpro on May 20, 2014, 12:40:55 pm

Hey Ian !!!

All I could find was a couple of sets of homemade fibreglass number plates a guy made for me years ago.They're kinda thin and not smooth but fit well and look good at 50 MPH and 200 feet away.The only 250 heads I found were a stock DT2MX and a DT2MX head that's been shaved to look like a 431 YZ250A head.I also had the extra 4 holes drilled in the head for the smaller 8 MM studs.
Let me know.

Title: Re: Wanted 1974 YZb side covers
Post by: Freakshow on May 22, 2014, 04:41:24 pm

hey ross interested in those side covers if you have them still....

Title: Re: Wanted 1974 YZb side covers
Post by: Rossvickicampbell on May 22, 2014, 05:56:59 pm

sorry mate - Iain snaffled them yesterday.