OzVMX Forum

Marketplace => Wanted => Topic started by: micko on April 14, 2014, 04:38:33 pm

Title: 34mm Mikuni Carb wanted
Post by: micko on April 14, 2014, 04:38:33 pm

Would anyone have the following.

I have a 75 RM125S that is missing the original 34mm carb, (standard on the "S" ) it came with a 28mm on it but also had the adapter plate and manifold to suit the 34mm in a box of parts. 

Cheers
Micko

Title: Re: 34mm Mikuni Carb wanted
Post by: Tim754 on April 14, 2014, 07:39:40 pm

http://www.mikunioz.com/mikunioz.htm     ;) Place to ask first friend, they are the Australian Mikuni agents, aka "Hatricks of Townsville. ;)

Title: Re: 34mm Mikuni Carb wanted
Post by: mudguard on April 14, 2014, 08:24:45 pm

Give Hatricks a call.  I rang him last Thursday arvo 3.30pm and ordered a 34mm Mikuni, was delivered to my house in Brisbane 10.30am the next morning. Great to deal with.

Title: Re: 34mm Mikuni Carb wanted
Post by: pmc57 on April 14, 2014, 08:48:49 pm

Does your box of bits also include a boot to suit the 34mm carby to the S airbox? Does a 28mm carby have the same intake diameter as a 34mm carby?

Title: Re: 34mm Mikuni Carb wanted
Post by: micko on April 14, 2014, 09:56:26 pm

Sure did have the big air boot on it, they had machined a nylon sleeve adapter to fit the little carb.
Thanks for the info guys.

Title: Re: 34mm Mikuni Carb wanted
Post by: micko on April 14, 2014, 09:59:35 pm

And no to the last sentence, but a 32 & 34mm have the same OD I believe.