OzVMX Forum

Marque Remarks => Honda => Topic started by: smed on April 09, 2014, 05:49:13 pm

Title: 78/79/80 CR250 hammerhead gearlever
Post by: smed on April 09, 2014, 05:49:13 pm

(http://i1266.photobucket.com/albums/jj529/smed45/IMG_3015_zps2b4f1f5b.jpg) (http://s1266.photobucket.com/user/smed45/media/IMG_3015_zps2b4f1f5b.jpg.html)

Made to suit BMW R1200GS std length(0 tip ;)) 120mm approx from centre of spline to centre of shift tip,the original one is shorter(too short for my size 9's)& non folding ;)

the spline seemed either slightly too low or too high,I settled for too high ;)

You need to remove the footrest bracket to get the pinch bolt in or out :)

 

Title: Re: 78/79/80 CR250 hammerhead gearlever
Post by: Rossvickicampbell on April 09, 2014, 06:52:33 pm

excellent - well done!

Title: Re: 78/79/80 CR250 hammerhead gearlever
Post by: smed on April 09, 2014, 07:30:35 pm

I must credit popeye for giving me the heads up,he had one on his bike, Also thanks to the bimmer owners who confirmed what length tip I needed  :)