OzVMX Forum

Marketplace => Wanted => Topic started by: dousty on March 24, 2014, 08:48:02 am

Title: YZ250G parts
Post by: dousty on March 24, 2014, 08:48:02 am

Gday,
           I getting my 250 up and running but I need a few parts to make it happen. I'm not looking for NOS parts, just serviceable items that will get the bike running and close to original.

 *Fork inner tubes - mine are rusty. You may have some 38mm forks laying in the corner with good chrome?
*Airbox - I need an airbox with intake boot etc. I removed the original one years (and many houses) ago and now I can't find it  :-[
*Rear wheel - Previous owner has laced up a 19" chrome rim and I would like to go back to 18 in alloy. No badly cracked rims please
 *Rear brake stay - previous owner has fitted something that is cut down and works but it looks crap
*Rear brake rod - again, previous owner has fitted a cable that's too long. So, the actuating arm is adjusted rearward on the spline and the spring on the backing plate is no longer in use


Thanks

 

Title: Re: YZ250G parts
Post by: dousty on March 25, 2014, 11:38:12 am

 It seems I have been lucky! Of the list above all I would like now is the rear wheel. (Hopefully the parts I have coming are correct  :))