OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: hampster on February 21, 2014, 02:33:50 pm

Title: 84 wr timing.
Post by: hampster on February 21, 2014, 02:33:50 pm

Hi all,

 can anbody help me with btdc settings for 84 wr 250? 

Than ks Chris

Title: Re: 84 wr timing.
Post by: XC83 on February 21, 2014, 10:36:34 pm

Information Heaven.....

http://www.cafehusky.com/forums/vintage-tech-ref-and-parts.66/

Title: Re: 84 wr timing.
Post by: HVA61 on February 22, 2014, 07:46:19 am

2.55mm BTDC 83 and 84 model 240 & 250's SEM ignition on the WR's and Motoplat on CR's and XC's

1.95 mm for  82 model 250  SEM ignition on the WR's and Motoplat on CR's and XC's

2.43 mm for 1981 model 250  Motoplat on WR's , Cr's and XC's

Title: Re: 84 wr timing.
Post by: Tim754 on February 23, 2014, 11:39:21 pm

If you PM me an email address Mr Hampster, I could send you a PDF of the complete parts book in Engrish and some other lingos for the 84 Huskies. Cheers Tim754

Title: Re: 84 wr timing.
Post by: hampster on February 24, 2014, 09:05:38 pm

Quote from: HVA61 on February 22, 2014, 07:46:19 am

2.55mm BTDC 83 and 84 model 240 & 250's SEM ignition on the WR's and Motoplat on CR's and XC's

1.95 mm for  82 model 250  SEM ignition on the WR's and Motoplat on CR's and XC's

2.43 mm for 1981 model 250  Motoplat on WR's , Cr's and XC's

Thanks that's vary helpful.

Chris

Title: Re: 84 wr timing.
Post by: Tim754 on February 24, 2014, 11:36:36 pm

PDF of parts book on the way, always handy during a rebuild Cheers :D