OzVMX Forum

Marketplace => Wanted => Topic started by: LWC82PE on June 14, 2008, 12:18:29 pm

Title: fox airshox/parts
Post by: LWC82PE on June 14, 2008, 12:18:29 pm
Wanted - Fox air shoxs (later dual pressure design) ideally a set of the 14.75” long ones, part number 99-1475.
I will also accept parts from other shocks or odd shocks. I mainly require bodies and shafts. I prefer the bodies to be pretty good but I don’t care what the shafts are like as long as they are repairable. I prefer bodies and shafts that have had no previous modifications.

I require any bodies from 14.75” shocks or longer
And 2 shafts from any shocks 14.75” or longer. Ideally 2 shafts from a set of 14.75” or 15.50” but shafts from any other shocks longer than 14.75” will be fine. They also do not have to match. They can be different length shafts.

You can email me at [email protected] or send me a PM
Title: Re: fox airshox/parts
Post by: mainline on June 14, 2008, 05:13:46 pm
are these too long or too exxy (or both)

http://cgi.ebay.com/ebaymotors/MOTO-X-FOX-Airshox-AHRMA-vintage-mx-motocross_W0QQcmdZViewItemQQcategoryZ34284QQihZ015QQitemZ250257141232QQrdZ1QQsspagenameZWDVW
Title: Re: fox airshox/parts
Post by: LWC82PE on June 14, 2008, 07:46:06 pm
Yeah seen those. Would have been good if they did not have shaved bodies. Not much else on ebay at the moment. Too long is better than too short anyway. I want a 14.75 set or a longer set to make that length. I’ve got all the specs etc and Thor Lawson is helping me out with stuff but I really would like 2 more bodies and shafts.
Title: Re: fox airshox/parts
Post by: flower pot racing on May 24, 2012, 09:19:17 pm
Did this get resolved?  I am just having mine rebuilt with new bodies and nuts.  All the body lengths are available and nuts to suit.  In stock now.
Bodies are aerospace grade alloy that has been hard anodised, the colour is beautiful, like gun metal grey.  Nuts are equally as stunning.

(Ti lock nuts for the end of the rod also available)

So if you or anyone else is in a bind and need bodies (3 lengths available) and / or nuts, help is available.  (and of course seal kits, bladders etc which is all widely available anyway)

(Would post a pic, if only I knew how.  One day I will get that sorted.....)
Title: Re: fox airshox/parts
Post by: marshallmech on May 25, 2012, 07:02:59 pm
from where ? who is making them ?prices ?

Thanks
Title: Re: fox airshox/parts
Post by: flower pot racing on May 26, 2012, 07:09:54 am
Quote from: marshallmech on May 25, 2012, 07:02:59 pm
from where ? who is making them ?prices ?

Thanks

They are in England.  Bodies are £105 each, Nuts are £65 each.  limited supply, available now, all plus postage.  If you buy a pair of bodies and the nuts to go with them, ever so slighly less.  Will ask Firko to stick up a pic as I still havent worked out how to do it...
Title: Re: fox airshox/parts
Post by: firko on May 28, 2012, 11:43:32 am
Flower Pot Ben sent me the following photos to go along with the previous posts regarding replacement parts for Fox Airshox. PM Ben for details.
(http://i333.photobucket.com/albums/m392/cherie_jones/longpairwithnuts.jpg)
(http://i333.photobucket.com/albums/m392/cherie_jones/longpairwithnutsoff.jpg)
(http://i333.photobucket.com/albums/m392/cherie_jones/pairofnuts.jpg)
Title: Re: fox airshox/parts
Post by: suzuki27 on May 28, 2012, 07:49:55 pm
Very nice. Is Thor Lawson up and running in the US?
Title: Re: fox airshox/parts
Post by: mick25 on May 28, 2012, 09:15:23 pm
Yes thor and lawson is up and running, I got some stuff off them a little while back..