OzVMX Forum

Clubroom => Tech Talk => Topic started by: LeighW on February 11, 2014, 07:32:02 pm

Title: honda cr 250 chain lowering bracket
Post by: LeighW on February 11, 2014, 07:32:02 pm: anyone put me onto a good cnc machine shop in melb need to make a chain lowering bracket for my cr 250 1980 cheers leigh
Title: Re: honda cr 250 chain lowering bracket
Post by: Lozza on February 11, 2014, 11:20:57 pm: Rick Williams
Ideal Engineering Solutions P/L
13 Halley Crescent Campbellfield Vic 3061
Mb : 0409 742 590
E : rick.idealengineeringsolutions @ gmail.com

Tell Rick I sent you
Title: Re: honda cr 250 chain lowering bracket
Post by: bigk on February 12, 2014, 08:08:35 am: That's a simple little bracket which would take about 1/2 an hour doing it nicely by hand, CNC machining seems way overkill & probably expensive for one unit. I'm sure I have a pattern here somewhere.
K
Title: Re: honda cr 250 chain lowering bracket
Post by: bazza on February 12, 2014, 09:53:08 am: why do you need to lower?
Title: Re: honda cr 250 chain lowering bracket
Post by: LeighW on February 12, 2014, 01:37:40 pm: I need to lower the roller because iv put a pfr arm on and being thicker when the chain is on there is not enough clearance between the roller and the swingarm in the std position
Title: Re: honda cr 250 chain lowering bracket
Post by: bigk on February 13, 2014, 08:13:24 am: There are other options if you don't want to use the lowering bracket way.
K
Title: Re: honda cr 250 chain lowering bracket
Post by: Rossvickicampbell on February 13, 2014, 09:36:54 am: Leigh - not sure if I mentioned and not sure if it is sutiable for your swingarm but for $75 I think it is (not sure there either - early start to the day) Karl Landrus makes one - might be easy enough to fit?
Title: Re: honda cr 250 chain lowering bracket
Post by: LeighW on February 13, 2014, 02:28:45 pm: thanks ross did order one from him paid didn't turn up put a claim in it got ugly real quik and not from my end cheers leigh
Title: Re: honda cr 250 chain lowering bracket
Post by: Rossvickicampbell on February 13, 2014, 04:57:58 pm: Leigh - not surprised - lets say I wouldn't spend big bucks for a swingarm with him again - sorry to hear.