OzVMX Forum

Marque Remarks => Maico => Topic started by: crabman on June 13, 2008, 04:52:22 am

Title: I Need help with my Maico- should I convert single to twin shock?
Post by: crabman on June 13, 2008, 04:52:22 am

Hi Gents
I am looking for some advice. I have a duplicate Maico Alpha 1 single shock 250 (completely restored). I have a part restored Maico 440 frame without a complete motor ( do have cases, barrel, head). I have considered using the complete 250 single shock  bike as a donor bilke and converting it into  a twin shock Maico 250cc.
Obviously the motor and frame will not match, The motor is from an 1982 single shocker, the frame probably late 70' S.
Any suggestions ?
Alternatively will the 440 barrel slip onto the block of the 250 ? Do the motor swop with the 440 barrel, head and pipe ? 
Once again any suggestions ?
Many thanks
Gavin w   :)
 
 Report to moderator    196.35.158.178 
 

Title: Re: I Need help with my Maico- should I convert single to twin shock?
Post by: Husky500evo on June 13, 2008, 08:12:40 am

The '81 & '82 motors have a different stud spacing where the cylinder bolts to the cases , compared to the earlier motors . But an '81/2 490 cylinder will bolt onto '81/2 250 cases . They also changed the stud spacing again in '83 for the primary gear drive motors . I think Wulfsport in the UK sell a frame kit to convert '82 single shock frames back to the '81 twin shock setup.

Title: Re: I Need help with my Maico- should I convert single to twin shock?
Post by: paul on June 13, 2008, 08:39:04 am

find a 78/79  frame and do the franken bike thing ,the later engine bolts straight in is the 82 250 a reed engine