OzVMX Forum
Marketplace => For Sale => Topic started by: Simo63 on January 27, 2014, 09:00:06 pm
-
I have a bunch of Second Hand/Used Parts to sell as I won’t need them anymore.
PLEASE NOTE IF YOU ARE INTERESTED IN ANY OF THE PARTS PLEASE EMAIL ME AT “[email protected]” .
The parts by make include:
YAMAHA
• XT/TT500 Kick start lever – suit most early girls $50
• XT/TT500 inlet manifold – Good condition $40
• YZ250D Fuel Tank. Yellow US version. No cap or tap $100
• YZ250H Rear brake lever. Aluminium, used but a great spare. $20
•
HONDA
• CR125/250 1987-88 Tank (may suit other models), no tap or cap $100
• CR125/250 1987-88 Radiator Shrouds (may suit other models), Great condition, original equipment, $50 the pair
• CR125/250 1987-88 side covers (may suit other models), Great condition, original equipment $60 the pair
• XR80 Kick start shaft. Complete kick start shaft and spring etc. Great condition. $30
• XR600 RF 1985 Plastic Tank $100
• XL250 RD/E/F Roller. Disc Brake front end, great tank, good instrument cluster etc etc. Will seperate parts and sell in pieces. Great condition. Parts priced individually :)
• CR250 1990 Upside down forks, great condition. $150
• CR250 1990 Rear shock, great condition. $100
• CR250 1990 Airbox, good condition. $60
• CR250 1990 Front wheel incl disc, great condition. $150
• CR250 1990 Rear wheel incl disc and sprocket, great condition. $150
• XL350 Motorsport Centre Inlet Port motor - Turns over, was running, No movement in cam/head, Incl Kick start.$550
KAWASAKI
• KDX400 Motor. 1979 twin shock model. I imported this as a running motor from the USA with the intention of building a KX400 similar to others that have been built however no longer have the time or inclination. It is complete with exhaust pipe, carby, electrics, kick starter etc. Everything you need. $750 (Sold Pending payment)
• KX250 A5 Frame, Tank, Swing arm, Airbox, Seat, motor mounts and a few other bits and bobs (no forks or wheels). This was the other part of the now abandoned KX400 project. Frame is in good condition. $550. (SOLD)
• KDX250 Front end including good forks, good wheel and triple clamps. Complete set up (again for the above project). Good condition $200
• KDX250 Fuel tank. Good condition $100
• KX250 A5 1979 Swing Arm. Good condition $125
• KX125 A5 1979 Swing Arm (might also suit 1978 A4?) Swing Arm. Good condition $125
SUZUKI
• RM250A Motor - Complete with ignition, CDI and coil. Missing piston, Bore and crank in VGC, Cases good $500
• PE175 Swing Arm. 1979/80 model. $40
PLEASE NOTE IF YOU ARE INTERESTED IN ANY OF THE PARTS PLEASE PM or EMAIL ME AT “[email protected]” .
-
I would like the tank if the current sale falls through please.
Ken
-
Add up dated. ::) ::)
-
Simo 1 Stewy 0
Simo, bring the 250 H brake pedal to Nats please. Don't wanna buy it , just hire it if we happen to bend/ break one. I don't have a spare.
Cheers
-
add in extra dollars .... price increase to motors. ;) boom boom
-
Simo 1 Stewy 0
Simo, bring the 250 H brake pedal to Nats please. Don't wanna buy it , just hire it if we happen to bend/ break one. I don't have a spare.
Cheers
Ted you can have it .. it's yours ..and I still owe ya :)
No. I don't want it. ;D Just be good if I could wander over to your camp and use it if we happen to destroy one. So I guess you still owe me BIGTIME 8) 8) 8) 8)
( Probably should have made that two words before the grammar coach marks it )
-
Simo how is the YZd tank not to scratched up . sorry to the punctuation guru I have buggered question key . Iain
-
Simo how is the YZd tank not to scratched up . sorry to the punctuation guru I have buggered question key . Iain
No punctuation guru anywhere near here Iain. The tank does have light sanding scratches. Send me your email address and I'll email you a few pictures.
Cheers
-
You have a sale with the tank Simo . how would you like the money or are you going to Broadford . Iain
-
Hi All,
Simo63, the TM 250 clutch cover and parts turned up today, they are exactly as described and I am VERY HAPPY! :) :)
Thankyou
-
Hi All,
Simo63, the TM 250 clutch cover and parts turned up today, they are exactly as described and I am VERY HAPPY! :) :)
Thankyou
Sweet Greg, thanks for the positive feedback :)
-
You have a sale with the tank Simo . how would you like the money or are you going to Broadford . Iain
Iain, did you still want the spare YZ Tank?
-
I got it off you a Cpl of months ago simo , grey moment !!
-
I got it off you a Cpl of months ago simo , grey moment !!
LOL .... yeah for sure... I've got a couple more of them and I was looking at them in the shed thinking .. "I'm sure one of the forum guys wanted one of those" .... definitely a grey moment mate :)
Forgive me please :)
-
Its even worse when you walk out to the shed with the mail from the US evilbay thinking you have just got the bargin and a rare hard to find part to find 6 of them you have forgotten that you have bought . Iain
-
Its even worse when you walk out to the shed with the mail from the US evilbay thinking you have just got the bargin and a rare hard to find part to find 6 of them you have forgotten that you have bought . Iain
Lol .. I'm not that bad yet mate but that's probably not too far off unfortunately :)
-
Bump 8)
-
how much wear is in the tt500 kicker?shinny still or rusted like the 1 ive got?
-
how much wear is in the tt500 kicker?shinny still or rusted like the 1 ive got?
half and half I'd say Matt. Bit shiny and a bit rusty .... I think it still has the rubber on it as well. Send me your email address and I'll forward a picture or two
-
ok I can live with the rust but how much wear in the knuckle/pivot though as the one ive got is stuffed??
-
ok I can live with the rust but how much wear in the knuckle/pivot though as the one ive got is stuffed??
I'll have a good look and let you know. Send me your email address and I'll send some pics and more details matt :)
-
Don't forget to bring my cz sprocket cover to cd 10 :)
-
Don't forget to bring my cz sprocket cover to cd 10 :)
I've forgotten already Brian :)