OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on January 20, 2014, 08:56:49 pm

Title: Junk.
Post by: Nathan S on January 20, 2014, 08:56:49 pm

Sorry for linking to Scumtree ad, but it's my most reliable way of getting photos up ATM:
http://www.gumtree.com.au/s-ad/yass/parts/assorted-vmx-parts-mx250-ty175-dt1-xt250-etc-/1036655598

Really, I'm only advertising it so I don't feel guilty if/when I throw it all away... If someone turns up and takes the lot, they can have it for a six pack.

Nathan.
04000 23847

Title: Re: Junk.
Post by: TT5 Matt on January 21, 2014, 03:56:37 am

ill take the xt250 s/cam ignition system thanks

Title: Re: Junk.
Post by: Nathan S on January 21, 2014, 10:20:56 pm

Too easy Matt. PM me your address.

:)

Title: Re: Junk.
Post by: Alisdair on January 22, 2014, 12:06:31 am

Really interested in the 

Clutch basket from early-mid 80s YZ250

Can you please upload some pictures of it here if possible,

It would be greatly appreciated

Al

Title: Re: Junk.
Post by: Nathan S on January 22, 2014, 08:46:26 pm

I'm having trouble getting photos to upload.
Can SMS them to you if you PM me your phone number.

------

Scrappy is coming on Tuesday. Anything not spoken for then, will be leaving with him.

Title: Re: Junk.
Post by: crossedup2 on January 22, 2014, 10:27:56 pm

Nathan
I'll take the internal rotors (125 and 250), MX250 head and AT1 seat.

Peter B

Title: Re: Junk.
Post by: Nathan S on January 22, 2014, 11:51:28 pm

No problemo Pedro.

Title: Re: Junk.
Post by: Nathan S on January 24, 2014, 06:06:09 pm

Sold:
DT1 oil tank & head gasket.

Spoken for/on hold:
XT ignition.
MX head.
Flywheels.
AT1 seat base.

Title: Re: Junk.
Post by: Nathan S on January 27, 2014, 06:06:11 pm

Scrappy has been put off until Thursday.

Also discovered a KDX175/KLX250 front hub with speedo drive.
DT1 (I think) flywheel.
AT1 bare airbox.
Big pile of used spokes & nipples. About 150 spokes, roughly.

Title: Re: Junk.
Post by: Nathan S on January 28, 2014, 09:21:07 pm

More:

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/IMG_2088_zps0f94e5e2.jpg)
Top row: 90s KTM, 80s YZ (obviously broken), generic oval plate modified to sit under a side-pipe, 89 KX, 89 KX modified for RWU forks.
Middle row: 3x home made front plates, mid-80s CR, 89 RM125, generic green ovals, 90s CR.
$5 each or take the lot for $10...

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/IMG_2090_zps53d71cf1.jpg)
Bars are both straight.
The top ones are ATV/Pastrana bend that I don't like,
the bottom pair have been shortened by about 10mm on each side - turns out that I'm fussy about handlebars...
$10 each set, $15 for both.

Title: Re: Junk.
Post by: Paul552 on January 28, 2014, 09:28:10 pm

Nathan is that a flash red cr plate? 84?

If so mate I will take it.

Pm sent

Title: Re: Junk.
Post by: Mick D on January 28, 2014, 09:56:08 pm

PM sent Nathan,

I wouldn't mind the spokes and nipples, handlebars and the KLX250 front hub if it has an intact backing plate?

Title: Re: Junk.
Post by: Nathan S on January 29, 2014, 07:44:35 am

KL250 piston sold.

Title: Re: Junk.
Post by: Davey Crocket on January 29, 2014, 09:00:59 am

Hey Nathan, would you have a 1W1 clutch hub?.....better still an IT175J hub?....apparently you can drill the 1W1 basket off the gear and bolt it to the 1T175J which seems to be very hard to find. Need it for a job I'm doing.

Title: Re: Junk.
Post by: TM BILL on January 29, 2014, 09:17:06 am

Joan if a 1w1 basket will work what about mono shock DT 175 ?

Title: Re: Junk.
Post by: Davey Crocket on January 29, 2014, 10:02:33 am

I think it does Bill, most used the same basket from YZ-D upwards for the next 8 or 9 years.....as long as it has 1W1 cast on the inside of the basket I can use it....125/175 all used the same basket, just a different gear riveted on the back. Apparently TZ yammie baskets are the same as the big YZed's, just different gear again and a huge price difference.

Title: Re: Junk.
Post by: Nathan S on January 29, 2014, 10:34:48 am

No spare 1W1 bits, sorry - unless you buy my 125D parts bike...

Front number plates all sold. :)

Title: Re: Junk.
Post by: Nathan S on January 29, 2014, 03:33:21 pm

IT250H/J airbox. No lid. $30.
Probably also suits IT465?
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/IMG_2072_zps23d439c1.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/IMG_2071_zps126a4c51.jpg)

Title: Re: Junk.
Post by: Nathan S on January 31, 2014, 05:03:59 pm

Bits in the post for Andrew, Matt, Rob & Tony.
Other bits safely put aside for Mick, Paul & Peter.

:)

Title: Re: Junk.
Post by: monte34 on January 31, 2014, 06:15:35 pm

Thanks Nathan, any luck with an ATMX pipe (assumes praying position)?
Cheers

Title: Re: Junk.
Post by: Nathan S on January 31, 2014, 07:28:08 pm

No, sorry mate.
Crossedup2 is the AT/CT kingpin nowdays - give him a yell.