OzVMX Forum

Marketplace => Wanted => Topic started by: hagon_84 on January 13, 2014, 11:04:07 pm

Title: Hagon parts
Post by: hagon_84 on January 13, 2014, 11:04:07 pm

Chasin a set of hagon hubs or complete wheels if anyone has any forsale

Title: Re: Hagon parts
Post by: jimg1au on January 14, 2014, 07:15:28 am

http://www.ebay.co.uk/itm/grasstrack-front-wheel-/121251231493?pt=UK_Motorcycle_Parts_13&hash=item1c3b22f705
see if the seller will post the lot or just the hub

Title: Re: Hagon parts
Post by: hagon_84 on January 14, 2014, 09:24:43 pm

Cheers Jim I've never imported anything from the uk is it easy enough to do ? Sounds dumb I no but I would wanna make sure it turns up if I bought it  ;D

Title: Re: Hagon parts
Post by: jimg1au on January 14, 2014, 09:43:30 pm

as long as they will send it air mail(costly compaired to the usa) i have found it ok.or if you want to send it by sea chass mrotimer could get you the whole wheel but with the import slugs the governmet is getting for our stuff from the usa it might be cheaper air mail.i no longer buy stuff in the usa as there is a 250.00 customs fee on invoices under 1000.00 aust
jim

Title: Re: Hagon parts
Post by: hagon_84 on January 16, 2014, 10:12:00 pm

No good Jim none of the wheels on there anyone will post to aus must have a thing against sending parts here  ??? So I'll keep lookin hopefully something local turns up
Al.

Title: Re: Hagon parts
Post by: jimg1au on January 16, 2014, 10:24:33 pm

AL
i think honda c90 hubs fit well and brakes work.if you want one that works till you get a gen one
jim

Title: Re: Hagon parts
Post by: Rosco86 on January 17, 2014, 09:37:57 am

I run a postie bike front hub on my Godden. Works as good as the original on my hagon and no one can argue eligibility as they have been around forever. Might get one via a wreckers but sometimes easier to buy whole bike, some of the real oldies used on farms or riding in the bush go cheap. Xr100 cables is the right length for my godden, standard cable was too long
Rosco86

Title: Re: Hagon parts
Post by: hagon_84 on January 20, 2014, 11:42:33 pm

I scored a 23in wheel complete with a full width hub and backing plate it a taka rim so it's jap but not sure what the hub is possibly early honda xl ? Dunno the axle seems to be fixed into it as well haven't had a real play around with to see if it comes out, also bit on the heavy side see how it pans out a c90 hub might be the go cheers.

Title: Re: Hagon parts
Post by: SlideRulz on January 21, 2014, 07:13:10 am

Back in the day my father used to lace up Suzuki A100 front hubs.

Title: Re: Hagon parts
Post by: Freakshow on January 22, 2014, 12:27:06 pm

IF YOUR USING POSTIE HUBS ARE YOU LACING INTO A 23" FRONT AND IF SO WHAT SPOKES FIT ?

Title: Re: Hagon parts
Post by: jimg1au on January 22, 2014, 03:17:19 pm

kerry
 you get them made to suit any wheel builder can do it
there is a guy in vic that will make them for you i think in broadford
jim

Title: Re: Hagon parts
Post by: Freakshow on January 23, 2014, 03:06:27 pm

yeah i was hoping you had come across and off the shelf match.  like didnt honda do a 23" in a bike there for a while

Title: Re: Hagon parts
Post by: hagon_84 on January 24, 2014, 08:48:29 pm

Some of the early 80's xl's ran 23in front wheels one of them probs be the best bet already set up I'm on the hunt for one now  ;)

Al.