OzVMX Forum

Marketplace => For Sale => Topic started by: HL400 on January 07, 2014, 02:31:29 pm

Title: Husky and PE parts
Post by: HL400 on January 07, 2014, 02:31:29 pm

FOR SALE

Mikuni 38mm Flat slide carby. Can of a running CR250 Husky Very good condition.
$60.00

Mossbarger 10 petal  reed cage  with adapter block came of a 1982 CR250 Husky will fit other models
$50.00

PVL ignition came of a 1983 CR500 Husky has been used twice will fit other models part number 70053. fits
(82-88) 390cc/420AE/430 Manual,(82-87) 360 Engines (Med Shaft 15mm Crank End)
And also 1983 to 1984 CR 500 and XC 500
$200.00

New DC plastic side cover kit for 1981-82CR Husky’s white
$30.00

PE 250 Cylinder has been rebored and a new Wiseco piston kit
I think the PE is C or a N the engine number is PE250-201855
$100.00 for the lot.


PM me and I can Email pictures all prices are plus freight.  HL

Title: Re: Husky and PE parts
Post by: JohnnyO on January 07, 2014, 03:06:03 pm

HL will that mossbarger fit a 77 CR390 cylinder? I'll take it if so..

Title: Re: Husky and PE parts
Post by: HL400 on January 07, 2014, 04:26:54 pm

Sorry Johnny O to late.   all the Husky parts are sold.

Only the PE stuff left.   HL

Title: Re: Husky and PE parts
Post by: TT5 Matt on January 07, 2014, 04:49:04 pm

has the pe250 cylinder got a cast in inlet spigot like the pe250t/x or a 3 bolt inlet manifold like the pe/rm 250 b/c/n?? if its a c/n cyl ill take it

Title: Re: Husky and PE parts
Post by: HL400 on January 07, 2014, 05:00:41 pm

Hi there Matt, its got a cast inlet so it must make it a t or an x.  HL

Title: Re: Husky and PE parts
Post by: Brian Watson on January 07, 2014, 05:17:52 pm

And just for your info JK....no..that reed assembly will not fit a 1977 series cylinder.......

Title: Re: Husky and PE parts
Post by: JohnnyO on January 07, 2014, 05:24:01 pm

Thanks Watto.. Where do I get one?

Title: Re: Husky and PE parts
Post by: HL400 on January 07, 2014, 05:37:15 pm

Johnny O email DC plastics in USA they have them.  HL            E-mail: [email protected]

Title: Re: Husky and PE parts
Post by: Brian Watson on January 07, 2014, 06:59:28 pm

I thought that Mossbarger were still making them "new"... they were first introduced about 1980 ish.. but will still fit a 1977 cylinder....I had my first one on my new at the time...1981 430 CR...they do come up from time to time on eBay....

Title: Re: Husky and PE parts
Post by: JohnnyO on January 07, 2014, 08:50:23 pm

Thanks lads I'll try DC. I put one on my CR430 years ago and it made the world of difference..

Title: Re: Husky and PE parts
Post by: smed on January 07, 2014, 08:56:54 pm

 http://www.mossbargerracing.com/comeback.htm      click on the application chart ;),    email       [email protected]  ,you still may have to go through DC to buy though JO :)

Title: Re: Husky and PE parts
Post by: JohnnyO on January 07, 2014, 09:25:52 pm

Thanks smed..