OzVMX Forum
Clubroom => General Discussion => Topic started by: John Orchard on December 31, 2013, 11:18:25 am
-
Hey Team, riding at the Farm this Thurs AND Sat. I'll get there around 10am both days, usually leave around 4 ish.
Rules for riding ....
Take your rubbish home.
Try not to destroy any young trees.
Use only 1st gear in the car park area.
Try and stick to the main marked-out circuit (I don't want tracks going everywhere).
You ride at your own risk.
If you have a trick bike you must let me have a ride (joking ;-) ).
Remember to bring food & drink and have a crap before you get there :-)
-
i reckon you need a coastal change John !
Sell everything and move on up to Northern NSW were i live so we can riding
together every weekend ;D
-
I'm going to arrange a 'vintage weekend' soon, camp overnight, that should be worth your drive down :-)
-
I'm down for Saturday John,see ya there :)
-
Jodie & I just went out today and put hay-bales around the one-line corners to start another line/berm, will test it out tomorrow with Pete, Mick and whom ever, should be nice by Sat :-) Looking forward to it.
-
If we get the shop closed on time sat I'm gonna try get out there!! Wouldn't get there till 2 ish so only a few laps for me but its better than nothing! :) looking forward to a Sunday at the farm someday!! Friggin retail industry hours suck! >:(
-
No worries Mate, we'll ride until you've had enough :-)
-
Hey john thinking about coming up for a ride on the sat could you please supply directions to get there.
Cheers Andy
-
Hey john thinking about coming up for a ride on the sat could you please supply directions to get there.
Cheers Andy
PM sent :-)
-
Looks like we've got half a dozen vmx'ers coming out on Sat, even if you don't have a bike you should drop in for a bullshit session ;-)
-
Gday johnny I may be up for a ride if I finish what im doing today .hope to get up there .hilly
-
Hey John thinking about coming up for a ride please sent me details and are moderns (2000 wr400) ok as well will have 250t on board anyway.
-
Gidday I wouldn't mind a ride, keen to get up there as well, please pm details thanks John, Bear
-
Nice, will be good to see you guys. The address is ... From Heathcote, take the C326 road towards Kyneton (Heathcote-Redesdale Rd), which starts off as 'Mitchell St' from Heathcote's main road. It is on the right exactly 10.5 km's from Heathcote. A strip of yellow duct-tape is wrapped around the tree at the front gate.
-
Anyone that frequents this forum is free to ride what ever they like.
-
Sounds like fun Johnny O
I will work on brother Scungy to get off his arse and come for a ride soon.
-
Had a ball riding today, thank you John, good track you have there, I took some photos today and will go through them now and get some up soon.
Cheers Mick.
-
Had a ball today thanks john & Jody great track great property
-
Gidday and thanks for the day John & Jodie, for letting us ride their track (the farm). Also to Leigh for the taking me. wow who cares about dust when you get to ride on such a well set up, natural terrain track. vintage friendly like you have never seen, no bloody jumps, just like the old days. this was my first ride since hbbb 2013, and getting the all clear from the surgeon, had a ball. also good to catch up with a bunch of great people, vintage like minded friendly folks. I will be doing this again. also - thanks ebt the for the photos - check them out in the photo forum section, they are great shots mate.Bear
-
No doubt I'm not the only one getting shitloads of gambling spam in my facebook newsfeed...
This one amused me. Couldn't think of a better place to put it...
(https://fbexternal-a.akamaihd.net/safe_image.php?d=AQDK7G0pfqDZYKHn&w=398&h=208&url=https%3A%2F%2Fgraph.facebook.com%2Fact_105369309589799%2Fadimages%3Fhashes%255B0%255D%3D959c0b7fbf21328256c177394bacf767%26redirect%3D1&cfs=1&upscale)
-
Ha ha, I wish.
-
Thanks John, Bear & KB for your phone calls.
Hopefully the last trip to the stainless steel room. The 490 Maico is easier to handle than these crutches ;D ;D
Hopefully get out to the farm with a couple of Maico's after I recover.
Thanks Ken Baker #54