OzVMX Forum

Marketplace => Wanted => Topic started by: bigk on December 30, 2013, 06:23:33 pm

Title: 79/80 Honda CR125 cylinder
Post by: bigk on December 30, 2013, 06:23:33 pm

I'm chasing a cylinder from 79/80 Honda CR125. This is purely for an "experiment" so bore or fin condition is not important. Actually a pretty stuffed one would do fine. I have plenty of '79 250 cylinders but sadly no 125's.
Cheers,
K

Title: Re: 79/80 Honda CR125 cylinder
Post by: jimson on January 04, 2014, 05:13:49 pm

G,day I have a add on here for a barrel and bottom end you can have the lot $100 + postage? Jimson

Title: Re: 79/80 Honda CR125 cylinder
Post by: SteveG47 on January 09, 2014, 12:19:42 pm

Hi Jimson, If you wanted to split barrel for bigk, and bigk was agreeable, I would be very interested in the bottom end!

Cheers,

Steve.

Title: Re: 79/80 Honda CR125 cylinder
Post by: bigk on January 09, 2014, 06:04:30 pm

I found a cylinder thanks.
K

Title: Re: 79/80 Honda CR125 cylinder
Post by: silverfox on January 09, 2014, 07:33:51 pm

I would take the head!! That's all I need

Title: Re: 79/80 Honda CR125 cylinder
Post by: SimonC on January 09, 2014, 07:50:54 pm

I would probably grab the clutch cover if it was still there.