OzVMX Forum

Marque Remarks => Honda => Topic started by: Paul552 on December 26, 2013, 04:46:00 pm

Title: Cr250 re air box flap
Post by: Paul552 on December 26, 2013, 04:46:00 pm

Hi all
I am chasing the rubber flap that is riveted around the air box on a cr250re
(http://i1290.photobucket.com/albums/b525/TFR555/896896906b928a48590a84839616477f_zps8fe3efe2.jpg)

Can you buy them?

You can see it on the right side of this pick.
It basically stops mud etc from back wheel getting around the air box.

Any help would be great

Title: Re: Cr250 re air box flap
Post by: Boyracer on January 09, 2014, 08:51:47 pm

Its not a big deal, universal ones are available or try Hawksbury Honda for some old stock.

Title: Re: Cr250 re air box flap
Post by: kdx 175 on January 09, 2014, 10:49:49 pm

paul can you cut one out of thin rubber sheet

Title: Re: Cr250 re air box flap
Post by: CRTAD313 on January 11, 2014, 10:45:23 pm

I made my own, traced around old one . Came up perfect, looks good.

Title: Re: Cr250 re air box flap
Post by: Paul552 on January 11, 2014, 11:09:01 pm

Quote from: CRTAD313 on January 11, 2014, 10:45:23 pm

I made my own, traced around old one . Came up perfect, looks good.

Yep I think that is what I need to do.
I don't really want to remove the one off my 125 to trace it. By any chance did you make a template?

Title: Re: Cr250 re air box flap
Post by: Snowy 76 on January 11, 2014, 11:15:15 pm

Will check tomorrow arvo, should have one you can use ,copy, have.

Title: Re: Cr250 re air box flap
Post by: CRTAD313 on January 17, 2014, 01:11:14 pm

Sorry no template