OzVMX Forum

Marque Remarks => Yamaha => Topic started by: Jed on June 07, 2008, 07:53:11 pm

Title: DT/RT aftermarket Pipes
Post by: Jed on June 07, 2008, 07:53:11 pm

      I've been scanning the ebay (who hasn't) for a pipe and some other bits to finish off my recently acquired RT project (only got a frame and motor so far). All of the old aftermarket pipes i have seen listed say that they suit 250's aswell as RT360's.  Is this the case ?  I just thought the bigger engine would need a bigger pipe or at least larger diameter at the header.  I doubt i would ever buy one  because they go for $200-$300 plus postage, but thought i would ask the question just in case.  Any help would be appreciated. 
         
                  Cheers,             JED

Title: Re: DT/RT aftermarket Pipes
Post by: vandy010 on June 07, 2008, 09:23:02 pm

i've got the RT1 and as far as i know both pipes are interchangable.
mine runs  a pipe from the RT2 with all the guts/baffles/mesh removed with a short stinger pipe into a shortened PE silencer. feels like pre-70 power to me.

Title: Re: DT/RT aftermarket Pipes
Post by: firko on June 07, 2008, 10:42:56 pm

I've got  GYT pipes for both my RT1 and DT1 and they're identical.

Title: Re: DT/RT aftermarket Pipes
Post by: jimg1au on June 08, 2008, 12:29:57 am

jed
i have a old verry ruff pipe from a dt360a 1974 you can have if you want i live in sydney

Title: Re: DT/RT aftermarket Pipes
Post by: Jed on June 08, 2008, 11:43:17 am

         Thanks alot for the tips fella's, very much appreciated.

      Jimg1au, that would be excellent mate. I will send you a pm and try to arrange a way for me to get it.
   
                                                 Cheers,    JED