OzVMX Forum

Clubroom => Tech Talk => Topic started by: Matador107 on November 21, 2013, 09:35:00 pm

Title: Rebores Sydney
Post by: Matador107 on November 21, 2013, 09:35:00 pm

I know about Greg Ball in Kirrawee but isn't there another bloke around Granville .Need a 2 stroke experienced bloke.
Thanks

Title: Re: Rebores Sydney
Post by: jimg1au on November 21, 2013, 09:38:53 pm

i used the guy in granville once never going back greg ball eveytime

Title: Re: Rebores Sydney
Post by: Matador107 on November 21, 2013, 09:43:02 pm

Thanks for that ,I'll take your advice and go for a drive then.
Martin

Title: Re: Rebores Sydney
Post by: cemotobull on November 21, 2013, 09:52:26 pm

Where in syd are u based?

Title: Re: Rebores Sydney
Post by: Matador107 on November 21, 2013, 09:58:22 pm

Carlingford. I know Kirrawee is a bit of a trip but if needs be can do a loop around from the city.will work it in through the week.
Do you have a better contact if the Granville bloke is not recommended, I want a Bully cylinder rebores so I want it done correctly.
Thanks

Title: Re: Rebores Sydney
Post by: cemotobull on November 21, 2013, 10:11:23 pm

MMT at Granville are no longer in business. For all my bully's I use CDA in Cromer on the Northern Beaches, Kelvin does an awesome job;

http://www.cdaengines.com.au/services.html

Title: Re: Rebores Sydney
Post by: piney on November 22, 2013, 07:51:38 am

I have used Parrys at Arncliffe, they installed new liner in my Bully cylinder. They also ceramic coated pistons, bored to suit and supplied rings for my two stroke barrels on my  tuk tuk .
Great guys to deal with

Title: Re: Rebores Sydney
Post by: Dono113 on November 22, 2013, 08:45:47 am

Craig at MMT is still around, he is working out of Londonderry Old Gold Motorcycles 02 4574 2885
http://www.oldgoldmotorcycles.com.au/index.htm
 ;D

Title: Re: Rebores Sydney
Post by: Matador107 on November 22, 2013, 10:00:37 am

Thanks for all the info blokes, looks like all four points of the compass are now covered for anyone else. Will report back.
VIVA.

Title: Re: Rebores Sydney
Post by: peter l on November 22, 2013, 08:38:24 pm

greg ball and his sons do excellent work been doing my stuff for last 25 years never had a problem

you will see him at a few heaven meetings next year on his kx500 84 model he just restored

peter

Title: Re: Rebores Sydney
Post by: oldyzman on November 22, 2013, 08:50:12 pm

Peak rebores in Peakhurst. Col is a good bloke, good prices and reliable. I have used him many times.
Brett

Title: Re: Rebores Sydney
Post by: Curtis on December 15, 2013, 11:58:41 am

I always used Craig at MMT, good guy, experienced never had a issue.

Title: Re: Rebores Sydney
Post by: Maicoman on December 15, 2013, 09:29:06 pm

Quote from: Curtis on December 15, 2013, 11:58:41 am

I always used Craig at MMT, good guy, experienced never had a issue.

Haven't used Craig for rebores but crank rebuilds, no dramas. I used to use Bakers at Blacktown, but they have since gone. I use Cavalier Engine rebuilds in Long street Smithfield. They do brilliant work.

Title: Re: Rebores Sydney
Post by: Paul552 on December 15, 2013, 09:53:55 pm

I just used Craig from mmt to bore my 125 and fit new rod. Great guy and good job.
(except he dropped my crank but hey accidents happen) :)