OzVMX Forum

Marque Remarks => Suzuki => Topic started by: TM BILL on August 19, 2007, 04:48:04 pm

Title: RM shocks
Post by: TM BILL on August 19, 2007, 04:48:04 pm

Can anybody please tell me what length the original shocks were for
RM 125 A
RM 250 A
RM 250 B
RM 125 B
RM 125 C
RM 250 C / C2
Thanks Bill

Title: Re: RM shocks
Post by: Freakshow on August 19, 2007, 07:00:55 pm

Not long enough ?

Title: Re: RM shocks
Post by: oldfart on August 19, 2007, 07:25:37 pm

Young William
                    Measured a set of Rm 125 b and 250 c and are the same 395 eye to eye centres

Title: Re: RM shocks
Post by: Doc on August 19, 2007, 08:12:11 pm

yup..me too Bill..measured the 400C and the 125C units and they are 395mm as well. So far as I knew the shocks on all the RM b's and C's (excepting 80's and 100's) were identical length The A model shocks without the remote res maybe a little shorter from memory but I don't have 1 to measure. I think N/T shocks may also be the same length but the eyes on the A/B/C are 10mm and I'm pretty sure the N and later models all use 8mm. Now what was the question  :-\

Title: Re: RM shocks
Post by: Quicksilver on August 20, 2007, 04:42:21 pm

Bill. I came up with 380mm for RM125A.

Title: Re: RM shocks
Post by: DR Fan on September 12, 2007, 03:27:56 pm

Bill measured my 250c2 shocks which are original and they are 395 eye 2 eye, see you at Waverly

Title: Re: RM shocks
Post by: DJRacing on September 12, 2007, 07:35:35 pm

So what are you thinking Bill? Are ya looking at building up a bike with different shocks?