OzVMX Forum
Marketplace => Wanted => Topic started by: Dono113 on October 24, 2013, 11:36:26 am
-
Chasing one, my one was what looked to be good nick turned out to be brittle :o and broke, now I know there is aftermarket ones out there(they are black) but I got hold of NOS one for the rear and was hoping for the front one.
Cheers
Bret.D
-
try that ebay seller called
jesusislordandgod (no i'm not joking)
-
DC plastics has them too
http://www.dcvmx.com/xcart/home.php?cat=1026&sort=title&sort_direction=0&page=2
-
http://www.andersonvintageparts.com/filter-by-part-number.html?partNumber=61273-14240
-
I think Alphasports in the U.S. too Dono, have a look on their site.
Kt
-
nup. should have known Brett, mate if you want my 465z one to try the fit you are welcome, its lightly used and i am re-fitting it, but you could try for fit and z/d are same part number and are available through Westerns in Penrith and no doubt Actions too from your contact, let me know can drop off in Narellan on wednesdays.
Kt.
-
Thanks Wayne, Jas down Mexico way has an 84 rm125 which looks close just gotta check out part numbers. Bloody thing as only cracked the other day, if I have no luck I'll let you know mate, I'll be checking on your parts today to see what the go is.
-
Guys,
The RM 500E chain slider should be similar to a 84 and 85 RM 250E/F slider I reckon.I have never checked but I think the swingarms are similar.The RM 500 part is definite NLA from Suzuki but do come up every once and a while on Evilbay.
I have a NOS one in my collection but will probably use a repo on my resto project given the scarcity of them.
Cheers
Craig
-
The problem with repo is they are nearly always different colour to NOS, that's why I was chasing one. The 465/500 are the same but dont think they will fit due to being different swing arms, Jas has a 84 125E one swingarm are very similar.
-
The problem with repo is they are nearly always different colour to NOS, that's why I was chasing one. The 465/500 are the same but dont think they will fit due to being different swing arms, Jas has a 84 125E one swingarm are very similar.
Agree the repos are ugly colours,young Jasons 125E slider will be interesting I wwill take a looom and see if I have any used 250E/F sliders in the shed and compare to my NOS 500E slider.
-
Yeah, you'd think the 85 125/250 should work as well.
Earlier 465/500 have a different shape to suit the different swing arm setup.
The 84 has a cutout to suit the different cushion arm lever position.
-
The problem with repo is they are nearly always different colour to NOS, that's why I was chasing one. The 465/500 are the same but dont think they will fit due to being different swing arms, Jas has a 84 125E one swingarm are very similar.
Agree the repos are ugly colours,young Jasons 125E slider will be interesting I wwill take a looom and see if I have any used 250E/F sliders in the shed and compare to my NOS 500E slider.
All his stuff seems a bit clunky.
You'd think he'd sell loads more if they were in the correct colour ???
-
The problem with repo is they are nearly always different colour to NOS, that's why I was chasing one. The 465/500 are the same but dont think they will fit due to being different swing arms, Jas has a 84 125E one swingarm are very similar.
Agree the repos are ugly colours,young Jasons 125E slider will be interesting I wwill take a looom and see if I have any used 250E/F sliders in the shed and compare to my NOS 500E slider.
All his stuff seems a bit clunky.
You'd think he'd sell loads more if they were in the correct colour ???
I reckon mate.Hopefully he reads this forum and will see the feedback?
-
Fingers crossed boys, my belief is why put nos in rear chain guard then just whack a black or blue slider in front looks shhhhhiiiiiitttttt 8)