OzVMX Forum

Clubroom => Tech Talk => Topic started by: asasin on October 19, 2013, 06:15:21 am

Title: sc500 gearbox
Post by: asasin on October 19, 2013, 06:15:21 am

All you Yamaha gurus , will a DT2 250 5 speed go into a SC500 gear housing . I measured the casings and they are the same width
 Thanks

Title: Re: sc500 gearbox
Post by: asasin on October 21, 2013, 01:34:17 pm

I have since found out SC500 and dt/mx 360 are the same , are these the same as DT II 250

Title: Re: sc500 gearbox
Post by: vandy010 on October 21, 2013, 02:20:01 pm

The 74 model DT250/360 box and the silver or yellow model MX250/360
Should all swap around with each other and the big SC500 no problems
At all.
Other models can be made to work also but may differ in the shift fork/drum
area ...
Cheers from Oz bro...

Title: Re: sc500 gearbox
Post by: asasin on October 21, 2013, 02:26:37 pm

Thanks Vandy , i knew some wiz would know . I may as well do it while it is apart
 Cheers
John

Title: Re: sc500 gearbox
Post by: Iain Cameron on October 26, 2013, 07:11:15 pm

Ive heard the go is the dt gears for dirt track and mx gears for motocross . its the 360 clusters you are after the shafts are different to the 250's . the 360 's will bolt in fine the balancer has to come out though . Iain