OzVMX Forum

Marque Remarks => Honda => Topic started by: huskibul on August 25, 2013, 12:23:33 pm

Title: 77' Honda cr125 mikuni jetting spec
Post by: huskibul on August 25, 2013, 12:23:33 pm

 Iam after baseline jetting spec's for 30/32mm mikuni on Cr125 m2/m3-any help much apreciated :) cheers

Title: Re: 77' Honda cr125 mikuni jetting spec
Post by: vandy010 on August 25, 2013, 01:53:26 pm

don't know about the 32mm but a mate just bought a 30mm off the shelf from Hatricks, bolted it on and it was good to go as is.
on a '76'CR125 that was.

Title: Re: 77' Honda cr125 mikuni jetting spec
Post by: huskibul on August 25, 2013, 02:18:37 pm

   Hi vandy thanks for that! but the bike had a 30mm mikuni on it when we got it , it also had a heavily ported barrel and what seems like  odd jetting  (went well),  have since gone back to std ported barrel and jetting  is all over the place would just like some baseline specs for 30mm so i know where i'am going-cheers :)