OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Tomas on August 22, 2013, 04:30:01 pm

Title: RM cdi units
Post by: Tomas on August 22, 2013, 04:30:01 pm

Just would like to ask for help  with cdi unit. I have a 1980 RM80 cdi unit. Can i use it on my 1979 RM125? Both units look identical apart from part numbers.
Thank you.
Tomas

Title: Re: RM cdi units
Post by: oldfart on August 22, 2013, 04:48:36 pm

RM 80  79 -80 -81 use the same CDI .... according to Suzuki .
Rm 125 and 100 share the same CDI  also

Title: Re: RM cdi units
Post by: Tomas on August 22, 2013, 06:18:09 pm

Thank you. So should i use Rm80 cdi on my RM125.Someone on this forum mentioned that RM 125 cdi works well on PE175 and also Ts185 works well on TM/RM 400. Also 1980 RM100 and RM400 shared the same cdi unit as far as i know. So is there any chance of blowing motor up or motor running too hot doing  this swap? 

Title: Re: RM cdi units
Post by: oldyzman on August 22, 2013, 06:31:59 pm

Being a 125 you are probably gunna give it a flogging, unless someone else has tried then i would not. If it was a Coil then why not. But the cdi advances the curve etc...
Brett