OzVMX Forum

Marketplace => Wanted => Topic started by: firko on August 19, 2013, 01:00:34 pm

Title: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: firko on August 19, 2013, 01:00:34 pm
I urgently need 2 Honda brake pedal bushings, part #46512-360-300 (Part #12 in the below diagram) to fit a '79 CR250 RZ or 1980 RA. I can probably get them from the USA but I need them by next weekend. Can new ones be sourced here in Oz or can someone supply me with a used pair?  Please :-*
                                                                                (http://i1112.photobucket.com/albums/k495/firko2/HondaCRbrakegraphic_zpsae093618.gif) (http://s1112.photobucket.com/user/firko2/media/HondaCRbrakegraphic_zpsae093618.gif.html)
Title: Re: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: Slakewell on August 19, 2013, 01:11:20 pm
Frank could knock them up for yeh in the lathe if you get stuck.
Title: Re: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: firko on August 19, 2013, 01:14:19 pm
Apparently the bushings I need fits all Honda CR'S from '74-80 as seen in the list below...
                                                                                      (http://i1112.photobucket.com/albums/k495/firko2/bushinglist_zps4f822a6e.jpg) (http://s1112.photobucket.com/user/firko2/media/bushinglist_zps4f822a6e.jpg.html)
                                                                                      (http://i1112.photobucket.com/albums/k495/firko2/bushing_zps642f3458.jpg) (http://s1112.photobucket.com/user/firko2/media/bushing_zps642f3458.jpg.html)
Title: Re: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: bigk on August 19, 2013, 01:23:13 pm
Just get some made, it's way easier.
K
Title: Re: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: firko on August 19, 2013, 02:17:17 pm
Quote
Frank could knock them up for yeh in the lathe if you get stuck.
Quote
Just get some made, it's way easier 
It's little thing like this that I miss being retired. I could have knocked 'em up out of Teflon in 10 minutes at work. I'll duck over to Franks tomorrow and get him to do 'em. I thought they might be a common old thing available at any Honda dealer but then I realised 1: Honda are hopeless and 2: there are no Honda dealers near here.
Title: Re: 1979 CR 250 Honda RZ brake pedal bushings.
Post by: oldyzman on August 19, 2013, 06:21:07 pm
Try your local bearing supplier ask for a 2 x glacier bush with a flange. about $5 each, they worked on my 125RZ. NSW bearing supplies at fairfield will do it. They have a 1mm wall thick ness, you may have to trim them with a thin blade...
Brett