OzVMX Forum

Clubroom => Bike Talk => Topic started by: firko on August 13, 2013, 09:55:15 pm

Title: Jetting specs.
Post by: firko on August 13, 2013, 09:55:15 pm

Does anyone have a good starting point for jetting a 36mm VM Mikuni on a TM400 Suzuki. The motor has blueprint port work, full circle rank and standard ignition with extra 2kg weights.
I bought  new 36mm to replace the 34 that was on it so I'm starting from scratch.

Title: Re: Jetting specs.
Post by: Lozza on August 13, 2013, 09:57:54 pm

Phew I'd have to look but either a 60 or 65 pilot, the needle from the TS standard carb(fairly lean) and around a either 280 or 380 main.

Title: Re: Jetting specs.
Post by: micks on August 14, 2013, 11:38:12 am

pump petrol or methanol

Title: Re: Jetting specs.
Post by: firko on August 14, 2013, 11:43:02 am

Petrol Mick