OzVMX Forum

Marketplace => eBay Finds => Topic started by: Nobby25 on August 08, 2013, 07:48:33 pm

Title: RM125?
Post by: Nobby25 on August 08, 2013, 07:48:33 pm

I know there was a C2 maybe there was a T2 ;D
http://motorcycle.donkiz-au.com/redir?rd=s&z=c&w=8761C01FBB677C8F&o=4B90386F19CC57824042556AC80FBD9BD165B7F01CFD90FA7CF3570293DC5CDDBCCA174FECD23F6664EACB62B2A4C2E60EB13E2278678D7922F10C31C5477F0877E35478C81096A02FF3AA70943275CD45AC2A4F052295EE&rq=CFDCB708E53AE3936F5582337AFA0058

Title: Re: RM125?
Post by: oldyzman on August 08, 2013, 09:16:44 pm

Thats the most ugly confusing thing i have seen for a very long time.
Brett

Title: Re: RM125?
Post by: Canam370 on August 08, 2013, 09:34:04 pm

C2? T2? Nah, just number twos..............

Title: Re: RM125?
Post by: Nathan S on August 08, 2013, 09:41:31 pm

The works version of the RMs were called TF, right!?

Title: Re: RM125?
Post by: John Orchard on August 08, 2013, 09:44:15 pm

TF for farm racing  :-)

Title: Re: RM125?
Post by: TM BILL on August 09, 2013, 05:19:20 am

The humble TF 125 makes a great donor bike for TMs early RMs  ;)

Rear hub , spokes , axle , spacers , adjusters, brake shoes , torque arm and bearings fit TM 125 upgrade ( no cush drive ) RM 125 S  RM 125 A / B  .
 
Front hub, spokes , axle , spacers ,brake shoes and bearingsRM 125 B / C

Fork stautions , Rear shocks ( shocks are great on TM 125s ) and front brake cable fit TM 125.

Clutch cable and coil fits TM125 to RM 125C

Sprockets fit TM 125 to RM 125B

Many fasteners and rubbers are universal to TMs RMs

Piston / rings fit TM 125

Rod kit fits TM 125 , RM 125S , RM 125B and RM 125C

Clutch plates fit TM 125 to RM 125T ( i think will double check )

Many engine bearings ,seals , lockwashers , nuts etc fit TM 125 to RM 125T

Base gasket fits RM 125 A, B, C

Title: Re: RM125?
Post by: Nobby25 on August 09, 2013, 12:53:29 pm

Hey Bill, I wasn't hanging sheet on the humble TF, I grabbed one a few years back as a donor for the RMS and I am still using parts from it now for the PE  ;D
Cheers Nob

Title: Re: RM125?
Post by: Nathan S on August 09, 2013, 02:36:47 pm

Quote from: TM bill on August 09, 2013, 05:19:20 am

The humble TF 125 makes a great donor bike for TMs early RMs  ;)

Rear hub , spokes , axle , spacers , adjusters, brake shoes , torque arm and bearings fit TM 125 upgrade ( no cush drive ) RM 125 S  RM 125 A / B  .
 
Front hub, spokes , axle , spacers ,brake shoes and bearingsRM 125 B / C

Fork stautions , Rear shocks ( shocks are great on TM 125s ) and front brake cable fit TM 125.

Clutch cable and coil fits TM125 to RM 125C

Sprockets fit TM 125 to RM 125B

Many fasteners and rubbers are universal to TMs RMs

Piston / rings fit TM 125

Rod kit fits TM 125 , RM 125S , RM 125B and RM 125C

Clutch plates fit TM 125 to RM 125T ( i think will double check )

Many engine bearings ,seals , lockwashers , nuts etc fit TM 125 to RM 125T

Base gasket fits RM 125 A, B, C

So Suzuki's farm bikes are closely related to their MXers?
This explains a lot about how well their MX bikes go.
:)

Title: Re: RM125?
Post by: Davey Crocket on August 09, 2013, 02:51:37 pm

Embarrassing isn't it Nathan, I've beaten you on a farm bike!!! ;D...now you know why the sheep run funny in NZ and why they are so good at motocross.....lol

Title: Re: RM125?
Post by: Nathan S on August 09, 2013, 03:34:18 pm

Quote from: Davey Crocket on August 09, 2013, 02:51:37 pm

Embarrassing isn't it Nathan, I've beaten you on a farm bike!!! ;D...now you know why the sheep run funny in NZ and why they are so good at motocross.....lol

One race out of four*, Mr Crocket, and only because I thought my gearbox was about to explode (turned out to be the selector arm rubbing on the back of the clutch basket).

*If I'm honest, I get beaten by ag bikes in about one race out of every four, anyhow.