OzVMX Forum

Marketplace => Wanted => Topic started by: Mudnut on July 28, 2013, 04:08:04 pm

Title: Suzuki RM 250 1979 Swing Arm
Post by: Mudnut on July 28, 2013, 04:08:04 pm

Hi

I'm after a Swinging arm for a RM 250 around 79 -80 , its to modifier & fit to a XR 500 ( twin shox ) .

Can any body help

Cheers

Mudnut

Title: Re: Suzuki RM 250 1979 Swing Arm
Post by: Richo52 on July 28, 2013, 08:57:54 pm

Hi I have a 78 RM 400C swingarm if that's any good?Regards Richard.

Title: Re: Suzuki RM 250 1979 Swing Arm
Post by: Eddy#36 on July 29, 2013, 06:07:24 am

I have a spare PE 400 79 model swingarm, slightly wider than the RM swingarm at the rear

Title: Re: Suzuki RM 250 1979 Swing Arm
Post by: Mudnut on July 30, 2013, 07:28:01 pm

Hi

Thanks for the replies , can you advise me distance across the pivot point that fits between the frame please. Also how much you looking for them .
The XR500 swinging arm is 210mm across the pivot point with out the seal caps .

Cheers

Dell

Title: Re: Suzuki RM 250 1979 Swing Arm
Post by: Curtis on August 04, 2013, 08:42:32 am

I have a 1980 RM400 swing arm in good nick!

Title: Re: Suzuki RM 250 1979 Swing Arm
Post by: Richo52 on August 17, 2013, 11:51:57 am

Mudnut has his swingarm now......Good luck with the project.Nice bloke to boot!