OzVMX Forum

Marketplace => Wanted => Topic started by: firko on July 22, 2013, 09:55:06 pm

Title: Wanted: Suzuki TM/TS400 rod kit.
Post by: firko on July 22, 2013, 09:55:06 pm

I'm going to fit a full circle TS crank to my TM400 for the Nats and will get Frank to balance it before I fit it. I'll need to fit a new big end and probably a new rod while its apart. Has anyone got one they'd sell me or can someone point me in the right direction to get one. Thank you in advance gentlemen ;).

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: TM BILL on July 23, 2013, 05:38:19 am

Mark i have a Suzuki rod i cant identify but i think it may be TM 400, if you can let me have the dimensions i will check it .

Bill

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: firko on July 23, 2013, 10:55:44 am

Quote

Mark i have a Suzuki rod i cant identify but i think it may be TM 400, if you can let me have the dimensions i will check it

Bill, I haven't got the dimensions, both motors are still together. Can one of you Suzuki know all's help out here please?

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: suzuki59 on July 23, 2013, 12:00:35 pm

Firko,one thing I do klnw is dont buy one off Paul Miller on Ebay.

I tried to buy one for a mate last year and he unsuccessfully sent me three which were all rusty and then shafted me the last time and wouldn't refund my money.

Be careful with this a##hole.

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: noisy toy on July 23, 2013, 12:56:32 pm

try www.mrcrankshaft.com he was very helpful with my rm465 crank. doesnt have one listed but could probably source a rod kit or even a crank ready to fit.
cheers

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: lukeb1961 on July 26, 2013, 03:02:14 am

Quote from: suzuki59 on July 23, 2013, 12:00:35 pm

Firko,one thing I do klnw is dont buy one off Paul Miller on Ebay.

I tried to buy one for a mate last year and he unsuccessfully sent me three which were all rusty and then shafted me the last time and wouldn't refund my money.

Be careful with this a##hole.

Sigh.. and YES I too am getting screwed around by Linda of Paul Miller Motorcycle.
Sent me the wrong item. Sent it back.
Sent me a different wrong item. Sent it back.
No refund, no replies...
These people are not looking terribly trustworthy.

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: Davey Crocket on July 26, 2013, 09:27:26 am

Ditto what Luke said.... at least I ended up with the right part for a discount in the end....abeit 3 weeks and 10 emails later.... ::)

Title: Re: Wanted: Suzuki TM/TS400 rod kit.
Post by: Tim754 on July 26, 2013, 12:10:55 pm

TS400 Early models
12161-32000 Rod connecting
12211-16500 pin
12221-32000 crankshaft
12261-32000 crankshaft left


TS400 A B
12161-32200  Rod connecting
12200-32810 crankshaft assembly
12211-16500 crank pin
12221-32200- crankshaft
12261-32200- crankshaft left
12511-16500- plate crankshaft oil guide