OzVMX Forum
Marketplace => Wanted => Topic started by: Husabergpete on July 14, 2013, 07:23:51 am
-
Gents,
Looking for a set of rear shocks to fit onto our 1973 CZ 250 Project. It had a set of Koni's from the day on it but the are Ka Poot.
I have another set of Koni's which are good but are about an inch too long which then causes issues with the original pipe fitting up correctly.
I also have a set of Falta air shocks which don't fit the 73 swing arm. Need the 74 and onwards set up. They will have to go.
Thanks
Pete