OzVMX Forum

Marketplace => For Sale => Topic started by: bigk on July 11, 2013, 08:57:41 pm

Title: PDI swing arm / Works shocks
Post by: bigk on July 11, 2013, 08:57:41 pm

I have a NOS PDI swing arm, un-machined raw casting. It could possibly suit many bikes but looks to be most suited to RM250/370 A & B. To use it will require machining of the bearing housings & rear axle slots etc, to suit your application. Not hard, but still something to do before it can be used. $350 plus postage.
Works Performance remote reservoir shocks, valved & sprung to suit 90kg. Adjustable spring pre-load, but no damping adjustments. 385mm in length. They work well and were fitted to '77 Husqvarna CR390 (2012 VIPER Pre'78 winning bike), but are correct length for RM250 A/B/C & others. Excellent condition. RRP $850, sell $550.
PM or email: [email protected]
K

Title: Re: PDI swing arm / Works shocks
Post by: TM BILL on July 13, 2013, 08:09:41 am

Any photos K

Title: Re: PDI swing arm / Works shocks
Post by: bigk on July 13, 2013, 08:41:57 am

Been pre-occupied, I'll get photo's to those who've asked & see if I can get some loaded on here.
Cheers,
K

Title: Re: PDI swing arm / Works shocks
Post by: TM BILL on July 13, 2013, 08:48:09 am

Thanks K [email protected]

Title: Re: PDI swing arm / Works shocks
Post by: paul on July 13, 2013, 09:52:09 am

(http://i382.photobucket.com/albums/oo263/ozmaico/PDIarmampWorksshocks001_zpsfaaa2ea2.jpg) (http://s382.photobucket.com/user/ozmaico/media/PDIarmampWorksshocks001_zpsfaaa2ea2.jpg.html)

Title: Re: PDI swing arm / Works shocks
Post by: Davey Crocket on July 13, 2013, 11:23:56 am

I've sent a pm regarding the shocks BigK.

Title: Re: PDI swing arm / Works shocks
Post by: bigk on July 13, 2013, 12:30:18 pm

Shocks are yours Davey, I'll send the details when I get the postage amount.
Cheers,
K

Title: Re: PDI swing arm / Works shocks
Post by: firko on July 13, 2013, 01:40:42 pm

I was lucky to pick up a PDI/Boyd and Stellings swingarm off Marks Swapmeet for $150 Canadian last week. The swingarm is marked 'Bul' presumably for Bultaco and was in a YZ250-A basket case the seller had just bought. The seller turned out to be a nice bloke, an Irishman living in Toronto who's got some interesting bikes and parts. We'll do more business.