OzVMX Forum
Marketplace => eBay Finds => Topic started by: Paul552 on June 30, 2013, 04:55:32 pm
-
http://www.gumtree.com.au/s-ad/penrith/accessories/yz125j-collectors-item-one-of-a-kind-very-fast-and-tidy-bike-/1022339552 :) :)
-
WOW, collectors item...Local too
I wouldn't let this one slip thru your fingers Paul.
-
WOW, collectors item...Local too
I wouldn't let this one slip thru your fingers Paul.
Man!!
What can I say Ted its closer to your place :)
-
F/WIT
-
Would have expected a spare powerband amongst those quality spares.
-
quote ...."During rebuild it was bored out and now has an engine capacity of a 250cc (one of a kind) "
??? ??? ::)
-
quote ...."During rebuild it was bored out and now has an engine capacity of a 250cc (one of a kind) "
??? ??? ::)
Some one should ask him who done the rebore on the motor.
Poppy
-
She is a one of a kind, hold onto her for another 5 years and she will be worth 10K
-
Wow! Stop squabbling you lot, I think finders keepers in this case unless he wants to give dibs to the next in line.
The highlight for me is the shot of the bike easily jumping over that flatbed without even needing a human on board! Must be the bike equivalent of Herbie.
-
quote ...."During rebuild it was bored out and now has an engine capacity of a 250cc (one of a kind) "
??? ??? ::)
Some one should ask him who done the rebore on the motor.
Poppy
DR Who did the rebore. That barrel must be like the tardis :D
-
it even comes with a spare right hand gearlever :)
-
150 bucks worth of manual !!! icing on the cake ::)
-
on my way up nth hope no one bids till I can get there . someone tell him he's a tosser .Iain
-
I wonder if he has replaced the muffler bearings? haha
-
300 dollar jacket ... must be a water jacket??
-
300 dollar jacket ... must be a straight jacket?? Some of these characters must be just bullshitting ::)
-
was gonna say "the fins must've fallen off if bored to 250" [forgetting it's water cooled ha]. Special thinner water makes them go faster too?--must get some.
-
quote ...."During rebuild it was bored out and now has an engine capacity of a 250cc (one of a kind) "
??? ??? ::)
Some one should ask him who done the rebore on the motor.
Poppy
DR Who did the rebore. That barrel must be like the tardis :D
Re-tardis
-
Iain,
Just sent him a long winded reply and gave it to the tosser, to correct every bit of his advertisement. Imbecile, shits me when sellers bullshit about an item.
Waiting for his reply? Won't hold my breath.
-
I always like it when they answer that I know nothing about their bike and how would I know that what they have done is impossible , eg one seller in the US was selling pistons for DT and RT Yamahas when I asked how the same piston fitted both a 250 and a 360 I was told to mind my own business . just plain stupid I guess , but some newby will fall for this garbage and get burned . Iain
-
maybe he has been reading Arizona Mikes adds? I,am surprized that its not a X works bike ridden by Dack ;D
-
maybe he has been reading Arizona Mikes adds? I,am surprized that its not a X works bike ridden by Dack ;D
Dacca rode it after it was bored out.
He was just too fast for the 125 class :)
-
Just think of this for a minute though. Back to basics lads!
if it has a 2.0mm oversize piston in it, could that not mean in someones calculations...
125cc's x 2.0 = 250cc's
Brett
-
well said Brett I must be soo dumb . Iain ;D
-
ah that makes sense..................shit no wonder my CR500 is fast its close to 750cc ::)
-
put a 2.0 mm o/s in and you can drop it straight into a 1000 cc roady and kill them on power to weight ;D :D
-
I just did some quick calculations it only needed to be bored out to about 80mm thats 24mm os no wonder it goes so well.
-
If we imagine for a minute that this was possible,how much fun would it be to ride,hole shots a plenty LOL
-
His secret is a re sleave with baking paper. ;D
-
I just did some quick calculations it only needed to be bored out to about 80mm thats 24mm os no wonder it goes so well.
its bored out so much the piston is now air cooled "flapping in the breeze due to no cylinder left"
-
I just did some quick calculations it only needed to be bored out to about 80mm thats 24mm os no wonder it goes so well.
its bored out so much the piston is now air cooled "flapping in the breeze due to no cylinder left"
You Honda boys just can't grasp BRUTAL Yamaha power. All Yammy 125's are waaaaaaay more powerful than the competitions 250's. face the facts and move on ;D
-
That air cooled piston thing got me thinking about the low friction environment due to minimizing cylinder wall contact that this visionary has perfected, or could this be some secret works bike exposed ?
-
my 'briggs' lawn mower motor has an 'alloy bore' [so i discovered]. OH GOD!! maybe he's having the last laugh 'on us' & just kept boring it till it fitted. Damn. Probably used one of them yamy 250 pistons on ebay that suits 'both' yz250 & 360--maybe not.
-
I still reckon the classic part is the wind deflector on the front guard. It was either running way too cold or it is an attempt to keep the front wheel down.