OzVMX Forum

Marketplace => Wanted => Topic started by: Tim754 on May 12, 2008, 01:55:37 pm

Title: Honda SL100/125 big bore kit
Post by: Tim754 on May 12, 2008, 01:55:37 pm

Anybody got an old SL100/125 big bore (150cc+) kit they wish to part with?  Used very OK too, can as a guide . Cheers Tim754

Title: Re: Honda SL100/125 big bore kit
Post by: caps 999 on May 12, 2008, 05:12:42 pm

are the barrells much differnt to the xr100 if there not try bbr

Title: Re: Honda SL100/125 big bore kit
Post by: Noel on May 12, 2008, 08:48:53 pm

Hi Tim,
Have you got the SL125 from snowy's yet,
 you may find one in there,
Noel

Title: Re: Honda SL100/125 big bore kit
Post by: Tim754 on May 12, 2008, 10:32:33 pm

Noel not yet, it is somewhere in transit???? ??? Cheers mate Tim   :)  Actually that frame is what I am building the new engine for  ;)

Title: Re: Honda SL100/125 big bore kit
Post by: Tim754 on May 12, 2008, 10:36:55 pm

Caps they are most different to XRs, except the little early 200. I need the pistons ,rings and gaskets as I have about a dozen barrels from 99cc to 230cc sleeved kits fitted.

Title: Re: Honda SL100/125 big bore kit
Post by: Snowy 76 on May 12, 2008, 10:39:10 pm

There is a little 4 stroke Honda and a box of bits here ! Who do I send the storage bills too?  :D

Title: Re: Honda SL100/125 big bore kit
Post by: Tim754 on May 12, 2008, 10:48:00 pm

Snowy you are a good person, I will get on to Nathan as he was at one stage going to pick it up I believe. PleasePM me a phone number if you like and i will give you a call about the "Storage charges" Cheers Tim ;)

Title: Re: Honda SL100/125 big bore kit
Post by: Snowy 76 on May 12, 2008, 11:17:57 pm

No worries Tim, only problem is that since I`ve introduced the little 4 stroke to the CR herd, performance has been a little off, but they are a bit easier to chase the chooks with!?