OzVMX Forum
Clubroom => Tech Talk => Topic started by: HL500 on May 14, 2013, 09:28:20 pm
-
Hi, can anyone tell me where I can get a standard piston kit and big end kit for the CR250? Best brands, what to stay away from and where to purchase?
Any help would be appreciated.
Regards
John
-
i have a wisico in mine and a prox rod kit
-
Ebay
http://www.ebay.com.au/itm/130784021909?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
HL500,
My personal preference for pistons is wosner or wossner, way better than wiseco in my opinion. Reasonably priced on Evilbay
Brett
-
will be using one next time around have herd good things about them
-
I've used both weisco and wossner and had no trouble with either, so long as all your clearances are correct and you run it in properly and don't forget to drill your holes for the bridge port and all should be good.....
Got my last Rod kit from Serco and the pistons..
-
Thanks for the advice guys.
John
-
I've used both weisco and wossner and had no trouble with either, so long as all your clearances are correct and you run it in properly and don't forget to drill your holes for the bridge port and all should be good.....
Got my last Rod kit from Serco and the pistons..
Hi, what do you mean about drilling out the bridge port? why is this necessary?
-
Instructions come with the piston kit, and are in the back of the elsinore manual,
Cheers KB
(http://i1260.photobucket.com/albums/ii576/KAB171/w22.jpg) (http://s1260.photobucket.com/user/KAB171/media/w22.jpg.html)
(http://i1260.photobucket.com/albums/ii576/KAB171/w1.jpg) (http://s1260.photobucket.com/user/KAB171/media/w1.jpg.html)
-
Thanks KB171