OzVMX Forum

Marketplace => Wanted => Topic started by: Nobby25 on May 13, 2013, 02:58:17 pm

Title: YZ250G kick start shaft
Post by: Nobby25 on May 13, 2013, 02:58:17 pm

Chasing a usable kick start shaft for a Yz250g as below #1
(http://i1139.photobucket.com/albums/n546/nobby25/Image-1_zps1413c72b.gif) (http://s1139.photobucket.com/user/nobby25/media/Image-1_zps1413c72b.gif.html)
Same for IT 250,465 H J , YZ 465 G H , YZ 250 J K N S T
Thanks Nob

Title: Re: YZ250G kick start shaft
Post by: YZ250H on May 13, 2013, 03:41:08 pm

250K shaft is made differently to the G/H and is the one to go for  ;)

Have you checked Mr Yamaha ?

Title: Re: YZ250G kick start shaft
Post by: Viper666 on May 13, 2013, 09:42:49 pm

http://www.boats.net/parts/detail/yamaha/Y-56A-15661-01-00.html (http://www.boats.net/parts/detail/yamaha/Y-56A-15661-01-00.html)

Lots of other models use it, YZ250 1980-87 IT/YZ465

http://www.ebay.com.au/itm/YAMAHA-YZ-250-1986-KICK-SHAFT-/350585016665?pt=Motorcycles_Parts_Accessories&hash=item51a07ed159#ht_681wt_1255 (http://www.ebay.com.au/itm/YAMAHA-YZ-250-1986-KICK-SHAFT-/350585016665?pt=Motorcycles_Parts_Accessories&hash=item51a07ed159#ht_681wt_1255)

http://www.ebay.com.au/itm/YAMAHA-IT-465-KICKSTART-SHAFT-GOOD-USED-CONDITION-/370650133270?pt=Motorcycles_Parts_Accessories&hash=item564c783316#ht_3616wt_1407 (http://www.ebay.com.au/itm/YAMAHA-IT-465-KICKSTART-SHAFT-GOOD-USED-CONDITION-/370650133270?pt=Motorcycles_Parts_Accessories&hash=item564c783316#ht_3616wt_1407)

http://www.ebay.com.au/itm/YAMAHA-YZ250-1980-YZ250-1981-KICK-START-SHAFT-/310668623440?pt=Motorcycles_Parts_Accessories&hash=item48554afe50#ht_230wt_1018 (http://www.ebay.com.au/itm/YAMAHA-YZ250-1980-YZ250-1981-KICK-START-SHAFT-/310668623440?pt=Motorcycles_Parts_Accessories&hash=item48554afe50#ht_230wt_1018)

Title: Re: YZ250G kick start shaft
Post by: Nobby25 on May 13, 2013, 10:16:37 pm

Thanks Yamaha Gurus, chasing for a mate, over $200 from Mr Yamaha :o, $150 landed new from the US.
thanks for these other options.
Cheers Nob.

Title: Re: YZ250G kick start shaft
Post by: rocketfrog on May 14, 2013, 08:32:14 am

check out the part number 3r4 = junk that will fail like most of them have at the spline mounted stop lug. (will still cost you an arm and a leg if you can find one as they are superceded by the 56a number)
                                     56a= one piece machined shaft that will last the rest of the bikes usable life. ($150 New is about right, look for a used 250 N starter shaft, should be about $30-$50 EBAY USA)

Sounds like 250H has been there before as well, go for the 56a number and you will be sorted ;)

Title: Re: YZ250G kick start shaft
Post by: Viper666 on May 14, 2013, 11:22:50 am

Quote

check out the part number 3r4 = junk that will fail like most of them have at the spline mounted stop lug. (will still cost you an arm and a leg if you can find one as they are superceded by the 56a number)

This is for the 56a part number, shows what models it fits. Ebay examples were just a few to show they are out there.

Quote

http://www.boats.net/parts/detail/yamaha/Y-56A-15661-01-00.html

This one $45 bucks landed from the US & it's an 86 model

Quote

http://www.ebay.com.au/itm/YAMAHA-YZ-250-1986-KICK-SHAFT-/350585016665?pt=Motorcycles_Parts_Accessories&hash=item51a07ed159#ht_681wt_1255