OzVMX Forum

Marque Remarks => KTM => Topic started by: Slakewell on April 30, 2013, 05:22:12 pm

Title: Need scans of 84 rear linkage
Post by: Slakewell on April 30, 2013, 05:22:12 pm

Does anyone have workshop manual for 82/84 rear swingarm and linkage?

Title: Re: Need scans of 84 rear linkage
Post by: supermotomc on April 30, 2013, 05:23:54 pm

yes what do you need

Title: Re: Need scans of 84 rear linkage
Post by: Slakewell on April 30, 2013, 05:36:01 pm

Can you please scan the assembly so I can which way the sucker goes together,  ???Yes It was in bits when I purchased it.

Title: Re: Need scans of 84 rear linkage
Post by: Hoony on April 30, 2013, 05:56:00 pm

Nice disclaimer slakey ;D

Title: Re: Need scans of 84 rear linkage
Post by: oz555ktm on April 30, 2013, 06:32:16 pm

    (http://i1063.photobucket.com/albums/t512/oz555ktm/scan0003_zps9a095d12.jpg) (http://s1063.photobucket.com/user/oz555ktm/media/scan0003_zps9a095d12.jpg.html)

Title: Re: Need scans of 84 rear linkage
Post by: oz555ktm on April 30, 2013, 10:03:34 pm

(http://i1063.photobucket.com/albums/t512/oz555ktm/1a379635.jpg) (http://s1063.photobucket.com/user/oz555ktm/media/1a379635.jpg.html)

Title: Re: Need scans of 84 rear linkage
Post by: Slakewell on May 01, 2013, 04:13:49 pm

Do you have manual showing the swing arm as well please. right now I think I have the correct bits in the swingarm pivot but its like 6mm to wide for the frame. Thanks for the other that explained some bolts for me. 

Title: Re: Need scans of 84 rear linkage
Post by: oz555ktm on May 01, 2013, 05:42:41 pm

   The swing arm photo dose not show you anything but the swing arm


    I will put it up later

Title: Re: Need scans of 84 rear linkage
Post by: oz555ktm on May 01, 2013, 08:56:22 pm

(http://i1063.photobucket.com/albums/t512/oz555ktm/ktm1984swingarm_zps649a5117.jpg) (http://s1063.photobucket.com/user/oz555ktm/media/ktm1984swingarm_zps649a5117.jpg.html)

Title: Re: Need scans of 84 rear linkage
Post by: Slakewell on May 01, 2013, 08:59:15 pm

There is no Manual for the swingarm bearing arrangement?

Title: Re: Need scans of 84 rear linkage
Post by: oz555ktm on May 01, 2013, 10:40:25 pm

  Remove the O Ring and try it then

       or

   do you have the wright Bearing   #550.03.097.00 or SKF2220
                                    Sleeve    560.03.032.100