OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: Duane799 on April 27, 2013, 12:20:25 pm

Title: 1970 CR400 Clutch Problem
Post by: Duane799 on April 27, 2013, 12:20:25 pm

 Occasions when riding the 400 the Clutch Arm/Push Rod drops down and you lose the clutch. You give it push and it relocates and is good again. Does anyone know why it does this. It never use to do this before I rebuild the motor and the clutch. Any answers will be greatly appreciated as it is annoy when it happens.

Title: Re: 1970 CR400 Clutch Problem
Post by: Snowy 76 on April 27, 2013, 01:18:10 pm

Sounds like the locating screw has been left out or is damaged  { screw behind ignition cover}

Title: Re: 1970 CR400 Clutch Problem
Post by: Duane799 on April 28, 2013, 08:36:41 pm

Thanks for that will check it out.