OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: Barronvmx on April 24, 2013, 09:47:25 pm

Title: Husky piston for 74 125, 1972 CR 400 base gasket.
Post by: Barronvmx on April 24, 2013, 09:47:25 pm

Does anyone have a 1974 125 piston kit 1st over size. it is 55.19mm Dia. The piston is different to the previous years as my engine has the longer conrod.
Need 1972 400 base gasket they are the same for all 400s up to 1974.
regards.
Glenn

Title: Re: Husky piston for 74 125, 1972 CR 400 base gasket.
Post by: 2T_vs_4T on April 24, 2013, 11:23:49 pm

Hi,
Can you post a photo of the piston you have and some dimensions.
Cheers 2T_vs_4T.

Title: Re: Husky piston for 74 125, 1972 CR 400 base gasket.
Post by: Huskydoggg on April 25, 2013, 01:24:34 am

Glenn,
If you can't find 1st over, I have a new 56.5 mm Wiseco kit available.
Steve
Huskydoggg.com

Title: Re: Husky piston for 74 125, 1972 CR 400 base gasket.
Post by: Barronvmx on June 05, 2013, 12:32:08 pm

Thanks anyway but found a Piston locally from Gary Mc and made my own gasket. I would be very careful using the wiseco for pre 75 huskies, they apparently fail and kill engines.