OzVMX Forum

Marque Remarks => Yamaha => Topic started by: firko on April 10, 2013, 02:20:09 pm

Title: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: firko on April 10, 2013, 02:20:09 pm: Here's shots of the new YZ/DT1 clutch actuators from Davey Crocket Industries'. John kindly sent me down his prototype to try on my flat tracker at HBBB but unfortunately I never got there. I'm sending it back to John so he can use it this weekend on his own YZ so I thought I'd run off a couple of rough photos of it mounted on my little unfinished Fastrac framed RT1 360. The workmanship is beyond brilliant and the clutch pull feels like a modern bike. I'll leave the technical details to John in case I get something wrong. I can't wait until I get my own cover over the next week or two.

   (http://i1112.photobucket.com/albums/k495/firko2/018-1_zps46e25913.jpg)
   (http://i1112.photobucket.com/albums/k495/firko2/019_zps8046e75b.jpg)
   (http://i1112.photobucket.com/albums/k495/firko2/017-1_zpsaf0d77b9.jpg)
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Rossvickicampbell on April 10, 2013, 03:55:22 pm: and John..................................... :D
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Iain Cameron on April 10, 2013, 07:14:34 pm: mmmmm Yes please 2 thanks John
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Davey Crocket on April 10, 2013, 07:24:41 pm: That DT2MX type mag cover you have on that Mark is a few mm shorter in height than the YZA/DT type, it lines up perfect on the normal one, its ironic a mate just dropped new USA import YZ250A off to me today to fit a new GMC "Stealth" muffler too and it has the DT2MX cover on it.....it will also get a new DC Industries clutch actuator cover assembly....and I gues I'd better get one off to you and Big Ross. ;D
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: pancho on April 10, 2013, 09:52:23 pm: I saw that one on Firkos' bike the other day and it really looks great in the flesh!
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: firko on April 10, 2013, 09:57:22 pm: Quote
That DT2MX type mag cover you have on that Mark is a few mm shorter in height than the YZA/DT type, it lines up perfect on the normal one, its ironic a mate just dropped new USA import YZ250A off to me today to fit a new GMC "Stealth" muffler too and it has the DT2MX cover on it.....it will also get a new DC Industries clutch actuator cover assembly....and I gues I'd better get one off to you and Big Ross.
Yeah John, I've got a proper DT1/YZ ignition cover ready to go on by the time my actuator is ready.
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Rossvickicampbell on April 11, 2013, 02:13:58 pm: yeah DC - I am actually a bit pissed that Firko got to be the test pilot - geez - talk about favouritism. Gunna go and sulk now - ;D

Actualy - let me check with a mate - might be able to take 2 off your hands. Have an idea on cost yet?

cheers

me
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: allan hughes on April 12, 2013, 09:46:09 am: 2 please
thanks al
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Freakshow on April 23, 2013, 01:00:57 pm: Seen it on the bike in queensland the other day, loks neat. would still like to figure out a tab down on the top mount so we can incorporate a chain/ case saver.
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Iain Cameron on June 25, 2013, 09:59:55 pm: ;D ;D ;D ;D ;D ;D ;D They are bloody lovely , Mine arrived today fitted it tonight the old DT1 looks like a rat with a gold tooth . Thanks John money on its way . Iain
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Davey Crocket on June 25, 2013, 11:11:52 pm: Your welcome.
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Rossvickicampbell on June 26, 2013, 08:34:54 am: I haven't seen mine yet - it's at home and I am not :'(
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: DG 26 on July 06, 2013, 03:06:39 pm: Hi how do we get one and how much heard DC not replying to email,s? cheers ;D ;D
Title: Re: Yamaha YZ250/360 A sprocket cover/clutch actuator.
Post by: Davey Crocket on July 06, 2013, 04:42:52 pm: I'm replying to emails that I've received, you can have one if you send me some money, the whole set up is $440 plus post which is about $12 Australia wide, you get all the bits, even the mounting bolts, just use your adjusting screw, works as good as it looks, I've sold quite a few so far and am getting more done. If you want one then send me a pm with your address, cheers John.