OzVMX Forum

Marque Remarks => Yamaha => Topic started by: Tahitian_Red on April 07, 2013, 12:49:18 pm

Title: DT-1/RT-1 Clutch Adjustment
Post by: Tahitian_Red on April 07, 2013, 12:49:18 pm

What is the proper way to take up the slack in the clutch cable on a DT-1/RT-1?  I'm almost all the way out on the lever adjustment.

Title: Re: DT-1/RT-1 Clutch Adjustment
Post by: pancho on April 07, 2013, 05:33:03 pm

this from a DT1 book but it works for me!

(http://i1069.photobucket.com/albums/u473/walter883/april13_zps72389e82.jpg)

cheers pancho.

Title: Re: DT-1/RT-1 Clutch Adjustment
Post by: pancho on April 07, 2013, 05:38:06 pm

 If the clutch pull feels unduly heavy, remove the housing (that the clutch cable goes into), dismantle the thust helix from the housing and check that the nylon helix is not split.
 If its ok, lubricate the parts and reassemble, if its split see if you can find a cheap new one, if so tell me first! ;D
 cheers pancho.

Title: Re: DT-1/RT-1 Clutch Adjustment
Post by: Davey Crocket on April 07, 2013, 05:42:52 pm

I will have complete new assy's for sale very soon, Firko will put a picture up.