OzVMX Forum

Clubroom => Tech Talk => Topic started by: Jim on April 04, 2013, 05:52:22 pm

Title: yz125e
Post by: Jim on April 04, 2013, 05:52:22 pm

looking for some info about the barrel it seems to have a sleeve/liner, is this a standard set up,or been done,had a look on a parts disc it does not appear there.give it a hone and it measures 56.180mm and the piston was second o/s.are these sleeves available around town or overseas..or any info appreciated...thanks...jim... 

Title: Re: yz125e
Post by: Viper666 on April 04, 2013, 06:46:46 pm

Jim,

Sorry, not quite following your question here but I think I get the gist.

Give me a ring 0427 334186 Neale

Title: Re: yz125e
Post by: oldyzman on April 04, 2013, 07:29:28 pm

Jim, just get the next size piston and have the cyl bored to suit, the sleve should be available. If i were you i would buy a wossner piston or a nos yamaha.
Brett

Title: Re: yz125e
Post by: Jim on April 04, 2013, 08:14:07 pm

thanks for the info fellas,i think a trip to the machine shop will be the safest way as stated,before i bugger it up...much appreciated...jim...