OzVMX Forum
Marketplace => Wanted => Topic started by: Tossa on February 10, 2013, 03:32:43 pm
-
OK, I have motor (turns over) frame, suspension, tank, seat wheels.
I need:
complete backing hubs, axles and spacers for both front and rear wheels
exhaust
carby intake and airbox
carby
front engine mount (have one to copy from thanks VMX247) but if I can get a set would be good
engine mount bolts
Exhaust
CDI
Also names of any good sources that you might use
thanks guys
Barry
-
Bump
-
Good luck Tossa they are a rare model and given the issues with main bearings and engine cases most are dead and scrapped.
I reckon buying another bike i.e. AJays would be a good move on this particular model and or pray stuff comes up on EvilBay.
Good luck mate ;)
-
thank you for your support!!lol i'm starting to think that way!!lol
Barry
-
Chamber & muffler
http://www.geoffmorrisconcepts.com/23/online-shop/12-Suzuki/
-
Good luck Tossa they are a rare model and given the issues with main bearings and engine cases most are dead and scrapped.
I reckon buying another bike i.e. AJays would be a good move on this particular model and or pray stuff comes up on EvilBay.
Good luck mate ;)
Motor turns over, got bearings, seals, gaskets coming.
got wheels, seat, tank, frame swing arm, forks and rear shock. Probably need new CDI or PVL system might be easier
couple of backing plates be PE or whatever. axles
basically the stuff i need Is nasically frame and wheel related. So we'll see where we go
-
Chamber & muffler
http://www.geoffmorrisconcepts.com/23/online-shop/12-Suzuki/
Yep seen that geoff, keeping my eye on everything. You are definitely not forgotten.
Barry
-
unfortunately he keeps popping up :'(
-
Iheard that Rossco
-
Where ya located tossa there is one for sale complete down Dapto way for 300 onohttp://www.gumtree.com.au/s-ad/dapto/motorcycles/rm-125-vmx-bike-thumpstar-and-a-motorised-bike-all-going-cheap/1013893015
-
Tossa I was referring to my boilermaker mate - not you (this time anyway!)
-
Well i've had a win and found another bike, now all i need is
Airbox either complete or just the outside covers, 82 or 83 will work
rear brake rod
sprocket cover
brake stay, would you believe both bikes have had the brake stay cut
left hand footpeg spring
muffler section of exhaust
Bike will then be complete
Cheers Barry
-
http://www.gumtree.com.au/s-ad/perth-region/motorcycles/rm-suzuki-250-x-vintage/1033778389
-
Baz - can you use one of those new DC plastics one sided airboxes?
-
I've got one complete 84 box, twop part 81 boxes and a complete 125 box, might just cover it but thanks Rossco
-
Heres a cheapie
http://www.gumtree.com.au/s-ad/port-pirie-south/motorcycles/1980-suzuki-rm250-air-cooled-2-stroke-vmx-/1033895284 (http://www.gumtree.com.au/s-ad/port-pirie-south/motorcycles/1980-suzuki-rm250-air-cooled-2-stroke-vmx-/1033895284)
-
Good luck Tossa they are a rare model and given the issues with main bearings and engine cases most are dead and scrapped.
I reckon buying another bike i.e. AJays would be a good move on this particular model and or pray stuff comes up on EvilBay.
Good luck mate ;)
suzuki59 are you sure about the main bearings being an issue because they are shared with the RM250Z and are larger than the RM250N/T ?
-
I got main bearings no problem
-
they are showing as available through alpha Suzuki
http://www.alpha-sports.com/suzuki_parts.htm?fpg=/smoto/1981%20RM250/01.htm
-
both my sets of casings had repairs made to them, all good Shelpi I've got just about a complete bike in parts
-
Good luck Tossa they are a rare model and given the issues with main bearings and engine cases most are dead and scrapped.
I reckon buying another bike i.e. AJays would be a good move on this particular model and or pray stuff comes up on EvilBay.
Good luck mate ;)
suzuki59 are you sure about the main bearings being an issue because they are shared with the RM250Z and are larger than the RM250N/T ?
Sorry to clarify it's not the main bearings but the issue caused by them spinning in the cases and hence buggering the cases :)
-
Good luck Tossa they are a rare model and given the issues with main bearings and engine cases most are dead and scrapped.
I reckon buying another bike i.e. AJays would be a good move on this particular model and or pray stuff comes up on EvilBay.
Good luck mate ;)
suzuki59 are you sure about the main bearings being an issue because they are shared with the RM250Z and are larger than the RM250N/T ?
Sorry to clarify it's not the main bearings but the issue caused by them spinning in the cases and hence buggering the cases :)
ah yes of course ;) cheers and Tossa yer thats where I got the part Number and sizes but to slack to put up the info :-[