OzVMX Forum

Marketplace => Wanted => Topic started by: John Orchard on February 06, 2013, 12:09:15 pm

Title: WANTED DT175E cylinder & head
Post by: John Orchard on February 06, 2013, 12:09:15 pm

The missus has a DT125E (cantilever & radial head) that we are fixing-up, looking for a cylinder & head, with or without piston, prefer not worn-out on last oversize  :-)  Not sure if IT175 stuff fits?

Title: Re: WANTED DT175E cylinder & head
Post by: Viper666 on February 06, 2013, 02:42:55 pm

A DT175 cyclinder will bolt on but not IT175 (Wider tranfer ports) but you will need the 175 head to suit.
Base gasket, crank & conrod all the same & exhaust will bolt straight up but I think the 175 is bigger in volume & would recommend 32mm carby, think the 125 is a 30mm

666

Title: Re: WANTED DT175E cylinder & head
Post by: TT5 Matt on February 06, 2013, 02:58:20 pm

pm send about cyl and head

Title: Re: WANTED DT175E cylinder & head
Post by: Nathan S on February 06, 2013, 11:20:57 pm

I've got two 2A7 DT175 top ends.

Cheap.

0400023847