OzVMX Forum
Marketplace => For Sale => Topic started by: Rookie#1 on February 03, 2013, 12:13:59 am
-
G'day again, i seem to be able accumulate masses of crap i mostly dont have a need for and all the while am scratching around for $$'s to finish the projects ive got on the go. So here's another shed cleanout that will hopefully get a few bits outta my way and in your way instead!! :D :D All items listed are priced without postage, if you're after anything pls pm me what you want and your address, i will then shoot you some bank details. Pickups from Bacchus Marsh, Vic are welcome.
Items pictured even though some cant be seen are:
Bottom left corner of pic is a whole bunch of YZ125D/E parts, will sell only as a lot. Barrel is on 2mm Wiseco so would suit re sleeve.Is also a rear hub that cant be seen in picture. $100 the lot.
IT 175 G/H chain block and guide, brand new repro's. Will fit some other models $50pair
IT 175 G/H chain case guard, has some wear but still usable $15
IT 175 G/H airbox with drain rubber $30
AG/CT 175 cylinder, with piston in place (fits snug) reading 66.50 on top , nos rings to suit. $40
Unknown Yamaha cluster and ignition barrel with key, most likely DT/AT/CT?? $25
IT 175 G/H complete rear shock unit, suit rebuild $50
IT 200/250/490 k,l,n,s speedo bracket $25
DT/IT/TT/ etc, repro lhs switch block. New, unused $15 SOLD
CR 125 nos rings, part #13021-402-003 $10
RT/MX/DT axel sprocket shaft, p/n 167-25387 nos. $15 SOLD
Gasket kit for RT/DT 360 $10 SOLD
IT square tool bag, very good order with zip ring still in tact $45
IT square tool bag, very good order only missing zip ring, $30
Nos unkown Suzuki head, p/n 11111-39107 $25
DT/RT 2/3 complete tank cap asmbly with pins and clips, after market (i think?) cap with gen nos push latch. $25
NOS IT and many other models D/E/F front plate with decal fitted, $180. Owes me more than that!! :'(
IT 200 l/n/s side covers, have some cracks but still present pretty well. $100 for the pair (3pcs)
NEW REPRODUCTION IT D/E/F/G tool bag $40 SOLD
NEW IT 175G tank cover $60, fits h also but not correct decal.
NEW IT 175 g/h, DC rear fenders. 1 with light mount, 1 Yz style in IT blue $35 the pair
IT 200 l/n/s tank with mounts $40
Hodaka front and rear fender, not perfect but far from buggered. $40 the pair
IT 200 l/n/s seat, ready to mount. No rips $40
IT-YZ G/H style repro fender (Maier) good high gloss repro, New and unused $60 SOLD
TT600 rare to find frond fender, some scratching on front but still very sound and usable.
(http://i1193.photobucket.com/albums/aa347/rookie110/IMG_2336_zpsf6029b3b.jpg)
(http://i1193.photobucket.com/albums/aa347/rookie110/IMG_2339_zpsfa7f534c.jpg)
(http://i1193.photobucket.com/albums/aa347/rookie110/IMG_2340_zps95b85a53.jpg)
-
I will take the new repo IT switch block & the repo tool bag for the IT. Just tell me total with postage & where to put the money.
Thanks Rory
-
I would like a tool bag. Do you accept paypal ? PM me your address if so...and thanks
-
have you got the cover that sits over the airbox Brendan?
-
have you got the cover that sits over the airbox Brendan?
Yeah I'll have a spare somewhere but no steel reatainer bar to hold in place.
-
I would like a tool bag. Do you accept paypal ? PM me your address if so...and thanks
I'll accept PayPal as long as you put it in as a "gift" not a purchase, shipping to US will be around $20 I think and just keep in mind prices are aud. if you want the tool bag shoot me your postal details and I'll send you my PayPal email. Cheers, Brendan
-
I will take the yz front gard. will pick up with the 80h sidecovers, thanks craig.
-
I will take the yz front gard. will pick up with the 80h sidecovers, thanks craig.
No worries Craig
-
Hi Rookie#1 I'll be interested in the DT/RT gasket set and the sprocket shaft . Iain
-
If you still have it. How much for the TT600 front guard??. Darcy
-
dkupf and ian, pm's sent :)
-
Hey Rookie. I'll have the front TT600 guard. Could you please PM me your bank details. Darcy
-
Will take the 2 IT250 speedo brackets and the good IT square toolbag with the zip ring intact please.
-
Banked today .
-
Just banked the money :). Thanks a lot Darcy
-
Banked the money as well. Thanks.
-
Banked the money on Monday.
Thanks Rory
-
Hi Rookie. Don't suppose you have a CDI for a 86 IT 200 or anything electrical
Cheers