OzVMX Forum
Marque Remarks => Suzuki => Topic started by: suzuki27 on April 28, 2008, 07:51:43 pm
-
Has anyone got a decent set of RM125B forks.Cash and/or RM parts to trade.Any help much appreciated.
-
27, I don't have a spare pair sorry but be it known '78 RM125/250/400C 36mm forks will also slot straight in. Only difference I believe is the spring rate and minor revalving which is minimal difference anyway, the rest is identical. Might make it easier to locate something ;)
-
Thanks Doc,but would they clear pre-78 scrutineering?-at the Classic titles for example.Thats my main worry.
-
yes they most certainly will 27..the C model forks are identical and perfectly legal in every way for pre '78 ;)
my pre '78 RM125 has an A frame and swingarm, A model tank, '78 PE250 forks/triples, '78 C rear shocks, '78 front wheel and A model rear. The engine itself is a '78 C but it too is flow on with little change from the '77,,it's all legal ;)
-
hey doc why do you run 78c shocks are they not too long and upset the handling
-
nope it all sits exactly the same when bolted up rm. No obvious gain in the C units only for the fact I had an RM125C and wanted to go pre '78. Keeping it within' regs I fitted as much C stuff as possible to the A chassis. The frames have the same geometry and are pretty much the same in all areas excepting a few little tabs and lugs and of course the steel swingarm instead of alloy of the C. It's like most of my bikes, a piece from here and a bit from there but they all seem to work ;)
-
Thanks for that DOC-gives me a bigger pool to look in.
-
I have a 125A pair id be happy to trade for parts.