OzVMX Forum

Marque Remarks => Honda => Topic started by: YUMASTEPSIDE on January 11, 2013, 07:27:05 pm

Title: MR175 CDI
Post by: YUMASTEPSIDE on January 11, 2013, 07:27:05 pm

Anyone know of a CDI backing plate and flywheel that will fit the taper on an MR175 honda?? I think the CR125 and MT125 have the same tapers......also the IT175 but the backing plate is too large   ??? ???

                                Roger

Title: Re: MR175 CDI
Post by: SON on January 11, 2013, 08:34:03 pm

From a memory starting to forget things MR175 and CR125 M2/M3 are the same cases,

Title: Re: MR175 CDI
Post by: YUMASTEPSIDE on January 12, 2013, 08:34:12 am

Yeah, pretty much everything on them is the same, CR125 gasket kits will fit except for head and base gaskets(base gasket will fit if you enlarge the centre)but the MR/MT's are points and the CR ignition will bolt straight up but doesn't have enough weight for the smaller MR crank.

                         Roger