OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: XC83 on January 07, 2013, 11:44:50 am

Title: AE500 Clutch Springs
Post by: XC83 on January 07, 2013, 11:44:50 am

Hi

Does anyone know the colour codes and part numbers for 2nd and 3rd gear clutch springs to suit the AE500?

Thanks

Title: Re: AE500 Clutch Springs
Post by: HuskyPete on January 07, 2013, 01:02:51 pm

Wayne,
16-12-553-01 (170N) for both sets.

80 420 uses the same spring in 3rd it's the same part# 16-12-553-01, it's neither Red or Green

86 Auto uses the same sping tension but different part#
16-17-026-01 (170N)

The Auto Manual discription of springs as follows
Red  12kp
Green 8kp
Bare metal or no colour 17kp  (i assume 17kp=170N) the heavier the spring the faster it needs to turn to drive.
This applies up to 80 as the manual discription for 84 does not mention colour code
 

Title: Re: AE500 Clutch Springs
Post by: HuskyPete on January 07, 2013, 01:25:14 pm

Check the spares at Husky Central, i have some of 16-12-553-01 spare

Title: Re: AE500 Clutch Springs
Post by: XC83 on January 07, 2013, 03:06:49 pm

Thanks 67 Husky

Title: Re: AE500 Clutch Springs
Post by: sa63 on February 13, 2013, 06:46:39 am

I am also chasing springs for 2/3rd gear clutch shoes - have you had any luck??

Title: Re: AE500 Clutch Springs
Post by: HVA61 on February 13, 2013, 08:07:20 am

Contact David Pratt in the USA

He should be able to help

On ebay usa he go's as tritrophy.

Title: Re: AE500 Clutch Springs
Post by: XC83 on February 13, 2013, 12:21:28 pm

SA63

Another source to try would be .....

Steve Borejko
Huskydoggg.com

Title: Re: AE500 Clutch Springs
Post by: sa63 on February 18, 2013, 06:58:01 am

ok thanks.
Tritrophy doesnt have them