OzVMX Forum

Marketplace => Wanted => Topic started by: Ando on December 17, 2012, 06:46:02 pm

Title: YZ250H - 4V3 cylinder
Post by: Ando on December 17, 2012, 06:46:02 pm: Hi all,

Chasing a good YZ250H cylinder

Cheers
Ando
Title: Re: YZ250H - 4V3 cylinder
Post by: worms on December 18, 2012, 08:53:11 am: I think I have 1, will let you know tomorrow.

Cheers worms
Title: Re: YZ250H - 4V3 cylinder
Post by: VMX Andrew on December 18, 2012, 11:58:28 am: MATE ive got a 3R4 250G cylinder thats looks like its been sandblasted on the outside.
Dont no what size bore its on,came as a spare with the bike.
If this rocks your boat let me no.
Cheers
Andrew
Title: Re: YZ250H - 4V3 cylinder
Post by: Ando on December 18, 2012, 08:41:13 pm: Hi Andrew, I have a few 3R4 cylinders. I wouldn't say they are in great shape though.

But I'm really trying to find a good original bore 4V3 cylinder. As the porting is slightly different.

Cheers
Ando
Title: Re: YZ250H - 4V3 cylinder
Post by: VMX Andrew on December 18, 2012, 09:13:42 pm: No worries mate thought it was an emergency. :)
Noticed theres a few on ebay in America right now.
Cheers
Andrew
Title: Re: YZ250H - 4V3 cylinder
Post by: craignduke on December 18, 2012, 09:28:50 pm: you've got more cylinders than a E type jag ando :D :D
Title: Re: YZ250H - 4V3 cylinder
Post by: Ando on December 19, 2012, 06:54:34 am: Quote from: VMX Andrew on December 18, 2012, 09:13:42 pm
No worries mate thought it was an emergency. :)
Noticed theres a few on ebay in America right now.
Cheers
Andrew

Cheers Andrew,

Seen them mate, there are both rooted! One is 71mm the other has been re-sleeved

& is at 71.5mm. I'm chasing a GOOD cylinder, one that has a lot of life left in it.

And one that has not been re-sleeved.
Title: Re: YZ250H - 4V3 cylinder
Post by: Ando on December 19, 2012, 06:58:18 am: Quote from: craignduke on December 18, 2012, 09:28:50 pm
you've got more cylinders than a E type jag ando :D :D

Yeah Craig,

Got a 3rd over 3R4 one of yours too ;)
Title: Re: YZ250H - 4V3 cylinder
Post by: worms on December 19, 2012, 08:08:37 am: sorry, only got 3r4's

cheers worms
Title: Re: YZ250H - 4V3 cylinder
Post by: maico police on December 19, 2012, 08:50:00 am: Turns out I've got 3R4's as well (bought them as YZ's ???. You're probably better off with one of them anyhow. A nicer ride I'd think.

I do have a NOS 4V3 cylinder but you probably want to hang onto that second kidney for a rainy day...... ;)
Title: Re: YZ250H - 4V3 cylinder
Post by: screamin62 on December 19, 2012, 02:36:43 pm: I think a properly re-sleeved cylinder is quite acceptable, Why are you concerned?
Title: Re: YZ250H - 4V3 cylinder
Post by: Ando on December 20, 2012, 04:54:31 pm: Quote from: screamin62 on December 19, 2012, 02:36:43 pm
I think a properly re-sleeved cylinder is quite acceptable, Why are you concerned?

I agree "IF" it's done correctly. I'm not concerned, just prefer a standard bore original for a spare that's all.
Title: Re: YZ250H - 4V3 cylinder
Post by: VMX Andrew on December 20, 2012, 09:13:04 pm: Hey Ando, put up a xmas wish list on marks swap meet.
You never no that cylinder might turn up underneath that xmas tree next tuesday morning. ;D